|
MANUFACTURER EXPORTER Maheboob Mansion, Chinchbunder, Mumbai 400009, India Tele.: 91-9322665100 |
Lithium Hydroxide Anhydrous Monohydrate Manufacturer Exporter IP BP Ph Eur USP NF FCC Food AR ACS Grade Manufacturer Exporter
Crystal Clear Products is a manufacturer exporter company manufacturing several chemicals including Lithium Hydroxide Anhydrous Monohydrate and IP BP Ph Eur USP NF JP ACS AR Analytical Reagent FCC Food Grade, Pharmaceutical Chemicals at best prices. The group has offices and factories in India USA and UAE and toll manufacturers in China and sells to almost every country in the world.
The manufacturing facilities of our partner manufacturers have one or more of FDA-cGMP-GLP certification, ISO-9001 certification, Halal and/or Kosher certification, REACH pre-registration ISO-22000 HACCP. We also allow third party inspection of products offered. We can offer small quantities from laboratory and trial packs to large shipments of container loads of material.
Hazard Statements:
H302: Harmful if swallowed
H314: Causes severe skin burns and eye damage
Signal Word: Danger
DOT USA, TDG Canada & ADR/RID Europe:
Proper shipping name: LITHIUM HYDROXIDE
Hazard Class: 8
Packaging group: II
UN Number: UN2680
IATA:
Proper shipping name: LITHIUM HYDROXIDE
Hazard Class: 8
Packaging group: II
UN Number: UN2680
IMDG/IMO:
Proper shipping name: LITHIUM HYDROXIDE
Hazard Class: 8
Packaging group: II
UN Number: UN2680
You may please visit:
Lithium Hydroxide Anhydrous Monohydrate SDS of Manufacturers
CAS Number 1310-66-3 monohydrate or 1310-65-2 anhydrous Lithium Hydroxide, EINECS: 215-183-4 or 603-454-3, Molecular Weight: 41.96 for monohydrate, Chemical Formula: LiOH-H2O for monohydrate
Specifications of Lithium Hydroxide USP Grade:
LiOH-H2O --- 41.96
LiOH --- 23.95
Lithium hydroxide monohydrate CAS 1310-66-3.
Lithium hydroxide Anhydrous CAS 1310-65-2.
DEFINITION
Lithium Hydroxide contains NLT 98.0% and NMT 102.0% of lithium hydroxide (LiOH), calculated on the anhydrous basis.
IDENTIFICATION
A. When moistened with hydrochloric acid, it imparts an intense crimson color to a nonluminous flame.
Chloride and Sulfate, Sulfate:
Sample: 2.0 g
Acceptance criteria: It shows no more sulfate than corresponds to 1.0 mL of 0.020 N sulfuric acid (0.05%).
Calcium:
Sample solution: Dissolve 3.33 g in 50 mL of 3 N hydrochloric acid. Boil the clear solution to expel carbon dioxide, add 5 mL of ammonium oxalate, render alkaline with 6 N ammonium hydroxide, and allow to stand for 4 h. Pass through a filtering crucible, and wash with warm water until the last washing yields no turbidity with calcium chloride. Place the crucible in a beaker, cover it with water, add 3 mL of sulfuric acid, and heat to 70C.
Analysis: Titrate the Sample solution with 0.10 N potassium permanganate to a pale pink color that persists for 30 s.
Acceptance criteria: NMT 3.34 mL of 0.10 N potassium permanganate is consumed (0.20%).
Carbonate:
[Note: While pipeting and during the subsequent titrations, keep the contents of the flasks blanketed with a stream of carbon dioxide-free air.]
Analysis: To the flask containing the completed Final titration obtained in the ;Assay, add 1 drop of methyl orange TS. Titrate with 0.1 N hydrochloric acid VS until a persistent orange color is produced and no undissolved barium carbonate remains. Perform a blank titration to determine the volume of 0.1 N hydrochloric acid consumed in going from the phenolphthalein endpoint to the methyl orange endpoint. To 100 mL of carbon dioxide-free water in a 250-mL conical flask, add 3 drops of the Sample solution from the Assay, 20 mL of 1 N barium chloride, and 3 drops of phenolphthalein TS. Allow to stand for 2 min. Titrate this solution with 0.1 N hydrochloric acid. At the discharge of the pink color of the indicator, add 1 drop of methyl orange TS, and titrate with 0.1 N hydrochloric acid VS until a persistent orange color is produced.
Acceptance criteria: The titration shows no more carbon dioxide than corresponds to 1.5 mL of 0.10 N hydrochloric acid (0.7%).
Lithium Content: To pass the test by Flame photometry.
Acceptance criteria: 28.1% to 29.9% on the anhydrous basis.
Water Determination:
Analysis: Dry at 135C at a pressure of NMT 5 mm of mercury for 1 h.
Acceptance criteria: 41.0% to 43.5%
Contact for Monograph, Uses, Matnfacturing Process, etc of Lithium Hydroxide Anhydrous Monohydrate and JP IP BP Ph Eur USP NF FCC Food AR ACS Reagent Grade Manufacturer Supplier Exporter
MANUFACTURER EXPORTER
MUMBAI 400009, INDIA. TEL: (OFFICE) 91-9322665100
info@manufacturerexporter.com
Copyright and Usual Disclaimer is Applicable
Last updated
11/19/2022
Manufacturer Suppliers Exporters at Wholesale Prices from India USA and around the Globe
Slaked Hydrated Lime Calcium Hydroxide BP USP IP ACS AR Analytical Reagent FCC Food Grade -- Dicalcium Malate Dihydroxide --
Lithium Citrate -- Lithium Carbonate -- Lithium Hydroxide -- Potassium Hydroxide Pellets --