Crystal Clear Products

MANUFACTURER EXPORTER
Maheboob Mansion, Chinchbunder, Mumbai 400009, India
Tele.: 91-9322665100

Home

Exporter Importer Palletized & Shrink-wrapped for Export Paletized Packing Drums on Palets Drums on Palets Air Cargo Export

Manganese Sulfate or Manganese Sulphate Manufacturer Exporter BP Ph Eur USP FCC Food AR ACS Grade Manufacturer Exporter

Crystal Clear Products is a manufacturer exporter company manufacturing several chemicals including Manganese Sulfate or Manganese Sulphate and IP BP Ph Eur USP NF JP ACS AR Analytical Reagent FCC Food Grade, Pharmaceutical Chemicals at best prices. The group has offices and factories in India USA and UAE and toll manufacturers in China and sells to almost every country in the world.

The manufacturing facilities of our partner manufacturers have one or more of FDA-cGMP-GLP certification, ISO-9001 certification, Halal and/or Kosher certification, REACH pre-registration ISO-22000 HACCP. We also allow third party inspection of products offered. We can offer small quantities from laboratory and trial packs to large shipments of container loads of material.

Hazard Statements:
H335: May cause respiratory irritation.
H373: May cause damage to organs through prolonged or repeated exposure.
H401: Toxic to aquatic life.
Health HazardAquatic Toxicity

Signal Word: Warning

Transport Information
DOT USA: Not dangerous goods
IMDG/IMO:
UN number: 3077; Class: 9; Packing group: III; EMS-No: F-A, S-F
Proper shipping name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Manganese Sulfate Monohydrate)
Marine pollutant: Marine pollutant
IATA/:
UN number: 3077; Class: 9; Packing group: III;
Proper shipping name: Environmentally hazardous substance, solid, n.o.s. (Manganese Sulfate Monohydrate)
ADR/RID Europe:
UN number: 3077; Class: 9; Packing group: III;
Proper shipping name: Environmentally hazardous substance, solid, n.o.s. (Manganese Sulfate Monohydrate)
Marine pollutant: Marine pollutant.

You may please visit:

Manganese Sulfate or Manganese Sulphate SDS of Manufacturers

Manganese Sulfate or Manganese Sulphate IP BP Ph Eur USP NF FCC Food AR ACS Reagent Grade Manufacturers

Manganese Sulfate or Manganese Sulphate Manufacturer Exporter

CAS Number 10034-96-5 Monohydrate and 7785-87-7 Anhydrous Manganese Sulfate or Manganese Sulphate, EINECS: 232-089-9, Molecular Weight: 169.02, Chemical Formula: MnSO4-H2O

Manganese Sulphate Monohydrate BP Ph Eur Grade Specifications
MnSO4-H2O

DEFINITION
Content: 99.0 per cent to 101.0 per cent (ignited substance).

CHARACTERS
Appearance: Pale pink crystalline powder, slightly hygroscopic.
Solubility: Freely soluble in water, practically insoluble in ethanol (96 per cent).

IDENTIFICATION
A. Solution S (see Tests) gives reaction of sulphates.
B. Dissolve 50 mg in 5 ml of water. Add 0.5 ml of ammonium sulphide solution. A pale pink precipitate is formed which dissolves on the addition of 1 ml of anhydrous acetic acid.
C. Loss on ignition (see Tests).

TESTS
Solution S: Dissolve 10.0 g in distilled water and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is not more opalescent than reference suspension.
Chlorides: Maximum 100 ppm.
Iron: Maximum 10 ppm, determined on solution S.
Zinc: Maximum 50 ppm.
Heavy metals: Maximum 20 ppm.
Loss on ignition: 10.0 per cent to 12.0 per cent, determined on 1.00 g at 500 ± 50C.


Manganese Sulphate BP Ph Eur Grade Specifications
MnSO4-4H2O

DEFINITION
Manganese Sulphate is manganese (II) sulphate tetrahydrate. It contains not less than 98.0% and not more than 100.5% of MnSO4, calculated with reference to the substance ignited at 450 to 500C.

CHARACTERISTICS
Pale pink crystals or crystalline powder.
Freely soluble in water; practically insoluble in ethanol (96%).

IDENTIFICATION
A. Dissolve 0.5 g in 10 ml of water and add 1 ml of sodium sulphide solution. A pink precipitate is produced which is soluble in 6M acetic acid.
B. To 0.1 g add 2 g of lead-(IV) oxide and 5 ml of nitric acid , boil gently for a few minutes, add 100 ml of water and filter. A purple solution is produced.
C. Yields the reactions characteristic of sulphates.

TESTS
Arsenic: 4 ppm
Heavy metals: 40 ppm
Iron: 40 ppm
Zinc: 500 ppm
Chloride: 330 ppm
Loss on ignition: When ignited to constant weight at 450C to 500C, loses 31.0 to 34.0% of its weight. Use 1 g.


Manganese Sulfate USP Grade Specifications
Manganese Sulfate
MnSO4-H2O 169.02
Sulfuric acid, manganese(2+) salt (1:1) monohydrate.
Manganese(2+) sulfate (1:1) monohydrate CAS 10034-96-5
Anhydrous 151.00 CAS 7785-87-7

Manganese Sulfate contains not less than 98.0 percent and not more than 102.0 percent of MnSO4-H2O.

Identification: A solution (1 in 10) responds to the tests for Manganese 191 and for Sulfate.
Loss on ignition: Ignite it at 450 to constant weight: it loses between 10.0% and 13.0% of its weight.
Substances not precipitated by ammonium sulfide: Dissolve 2.0 g in 90 mL of water, add 5 mL of ammonium hydroxide, warm the solution, and pass hydrogen sulfide through the solution for about 30 minutes. Dilute with water to 100 mL, mix, and allow the precipitate to settle. Decant the supernatant through a filter, transfer 50 mL of the clear filtrate to a tarred dish, evaporate to dryness, and ignite, gently at first and finally at 800 ± 25 : the weight of the residue does not exceed 5 mg (0.5%).


Manganese Sulfate FCC Food Grade Specifications
MnSO4-H2O Formula wt 169.02
CAS 7785-87-7

DESCRIPTION
Manganese Sulfate occurs as a pale-pink, granular powder. It is freely soluble in water, but is insoluble in alcohol.
Function: Nutrient.

REQUIREMENTS
Identification: A 1:10 aqueous solution gives positive tests for Manganese and for Sulfate.
Assay: Not less than 98.0% and not more than 102.0% of MnSO4-H2O.
Arsenic: Not more than 3 mg/kg.
Lead: Not more than 4 mg/kg.
Loss on Heating: Between 10.0% and 13.0%.
Selenium: Not more than 0.003%.


Manganese Sulfate Monohydrate Analytical Reagent Grade Specifications
Manganese Sulfate Monohydrate
Manganese (II) Sulfate Monohydrate
Manganous Sulfate Monohydrate
MnSO4-H2O
Formula Weight 169.02
CAS Number 10034-96-5

REQUIREMENTS
Assay: 98.0-101.0% MnSO4-H2O
Loss on ignition: 10.0-12.0%
Substances reducing permanganate: Passes test

MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Chloride (Cl): 0.005%
Calcium (Ca): 0.005%
Magnesium (Mg): 0.005%
Nickel (Ni): 0.02%
Potassium (K): 0.01%
Sodium (Na): 0.05%
Zinc (Zn): 0.005%
Heavy metals (as Pb): 0.002%
Iron (Fe): 0.002%.

Contact for Monograph, Uses, Matnfacturing Process, etc of Manganese Sulfate or Manganese Sulphate and JP IP BP Ph Eur USP NF FCC Food AR ACS Reagent Grade Manufacturer Supplier Exporter

MANUFACTURER EXPORTER
MUMBAI 400009, INDIA. TEL: (OFFICE) 91-9322665100

info@manufacturerexporter.com

Copyright and Usual Disclaimer is Applicable
Last updated 11/19/2022

Manufacturer Suppliers Exporters at Wholesale Prices from India USA and around the Globe
Aluminum Sulfate or Aluminium Sulphate -- Aluminium Potassium Sulphate or Aluminum Potassium Sulfate or Potash Alum or Potassium Alum -- Ammonium Persulphate -- Ammonium Sulfate -- Calcium Polystyrene Sulfonate or Calcium Polystyrene Sulphonate -- Calcium Sulfate -- Copper Sulfate or Copper Sulphate -- Ferrous Sulfate and Ferric Sulphate -- Magnesium Sulfate or Magnesium Sulphate -- Sodium Sulphate Anhydrous Decahydrate -- Sodium Thiosulfate Thiosulphate Pentahydrate Anhydrous -- Sodium Thiosulphate Thiosulfate IP BP USP ACS AR Analytical Reagent FCC Food Grade -- Vanadyl Sulfate or Vanadyl Sulphate --

Manganese Borogluconate -- Manganese Citrate -- Manganese Chloride -- Manganese Sulfate or Manganese Sulphate -- Zinc Sulfate or Zinc Sulphate --