|
MANUFACTURER EXPORTER Maheboob Mansion, Chinchbunder, Mumbai 400009, India Tele.: 91-9322665100 |
Adipic Acid Manufacturer Exporter BP Ph Eur USP NF FCC Food Grade Manufacturer Exporter
Crystal Clear Products is a manufacturer exporter company manufacturing several chemicals including Adipic Acid and IP BP Ph Eur USP NF JP ACS AR Analytical Reagent FCC Food Grade, Pharmaceutical Chemicals at best prices. The group has offices and factories in India USA and UAE and toll manufacturers in China and sells to almost every country in the world.
The manufacturing facilities of our partner manufacturers have one or more of FDA-cGMP-GLP certification, ISO-9001 certification, Halal and/or Kosher certification, REACH pre-registration ISO-22000 HACCP. We also allow third party inspection of products offered. We can offer small quantities from laboratory and trial packs to large shipments of container loads of material.
Hazard Statements:
H318: Causes serious eye damage.
Signal Word: Danger
Transport Information
DOT USA, TDG Canada & ADR/RID Europe: Not dangerous goods.
IMO/IMDG: Not dangerous goods.
IATA/ICAO: Not dangerous goods.
You may please visit:
Adipic Acid SDS of Manufacturers
Adipic Acid IP BP Ph Eur USP NF FCC Food AR ACS Reagent Grade Manufacturers
CAS Number 124-04-9 Adipic Acid, EINECS: 204-673-3, Molecular Weight: 146.14, Chemical Formula: C6H10O4
Adipic Acid USP NF Grade Specifications
C6H10O4 --- 146.1
Hexanedioic acid.
1,4-Butanedicarboxylic acid CAS 124-04-9
Adipic Acid contains not less than 99.0 percent and not more than 101.0 percent of C6H10O4, calculated on the dried basis.
Identification: Infrared Absorption 197K .
Melting range: between 151C and 154C.
Loss on drying: Dry it at 105C to constant weight: it loses not more than 0.2% of its weight.
Residue on ignition: not more than 0.1%.
Limit of nitrates: To pass the test
Chloride: A 5-mL portion of the Test solution from the Limit of nitrates test shows no more chloride than a corresponding 0.14-mL portion of 0.020 N hydrochloric acid: the limit is 0.02%.
Sulfate: A 5-mL portion of the Test solution from the Limit of nitrates test shows no more sulfate than a corresponding 0.26-mL portion of 0.020 N sulfuric acid: the limit is 0.05%.
Iron: Use a 10-mL portion of the Test solution from the Limit of nitrates test: the limit is 0.001%.
Heavy metals: 0.001%.
Adipic Acid BP Grade Specifications
C6H10O4 --- 146.1 --- CAS 124-04-9
Action and use: Excipient.
DEFINITION
Hexanedioic acid.
Content: 99.0 per cent to 101.0 per cent (dried substance).
CHARACTERS
Appearance: White or almost white, crystalline powder.
Solubility: Sparingly soluble in water, soluble in boiling water, freely soluble in alcohol and in methanol, soluble in acetone.
IDENTIFICATION
A. Melting point (2.2.14): 151C to 154C.
B. Infrared absorption spectrophotometry.
TESTS
Solution S: Dissolve 5.0 g with heating in distilled water and dilute to 50 ml with the same solvent. Allow to cool and to crystallise. Filter through a sintered-glass filter (40). Wash the filter with distilled water. Collect the filtrate and the washings until a volume of 50 ml is obtained.
Appearance of solution: The solution is clear and colourless.
Dissolve 1.0 g in methanol R and dilute to 20 ml with the same solvent.
Related substances: Liquid chromatography To pass the test.
Chlorides: Maximum 200 ppm.
Nitrates: Maximum 30 ppm.
Sulphates: Maximum 500 ppm.
Iron: Maximum 10 ppm.
Heavy metals: Maximum 10 ppm.
Loss on drying: Maximum 0.2 per cent, determined on 1.000 g by drying in an oven at 105C.
Sulphated ash: Maximum 0.1 per cent.
Adipic Acid FCC Food Grade
Hexanedioic Acid; 1,4-Butanedicarboxylic Acid
HOOC(CH2)4COOH
C6H10O4 Formula weight 146.14
INS: 355 CAS: 124-04-9
DESCRIPTION
Adipic Acid occurs as white crystals or a crystalline powder. It is not hygroscopic. It is freely soluble in alcohol, soluble in acetone, and slightly soluble in water.
Function: Buffer; neutralizing agent.
Assay: Not less than 99.6% and not more than 101.0% of C6H10O4, calculated on the anhydrous basis.
Lead: Not more than 2 mg/kg.
Melting Range: Between 151.5C and 154C.
Residue on Ignition: Not more than 0.002%.
Water: Not more than 0.2%.
Contact for Monograph, Uses, Matnfacturing Process, etc of Adipic Acid and JP IP BP Ph Eur USP NF FCC Food AR ACS Reagent Grade Manufacturer Supplier Exporter
MANUFACTURER EXPORTER
MUMBAI 400009, INDIA. TEL: (OFFICE) 91-9322665100
info@manufacturerexporter.com
Copyright and Usual Disclaimer is Applicable
Last updated
11/19/2022
Manufacturer Suppliers Exporters at Wholesale Prices from India USA and around the Globe
Glacial Acetic Acid -- Benzoic Acid -- Boric Acid-- Citric Acid -- Fumaric Acid -- Hyaluronic Acid -- Lactic Acid -- Lactobionic Acid -- Maleic Acid -- Malic Acid -- Myristic Acid -- Propionic Acid -- Selenious Acid -- Sorbic Acid -- Stearic Acid -- Tartaric Acid -- Undecylenic Acid --
Adipic Acid -- Alginic Acid -- Ascorbic Acid -- Erythorbic Acid --