|
MANUFACTURER EXPORTER Maheboob Mansion, Chinchbunder, Mumbai 400009, India Tele.: 91-9322665100 |
Tartaric Acid Manufacturer Exporter BP Ph Eur USP NF FCC Food AR ACS Grade Manufacturer Exporter
Crystal Clear Products is a manufacturer exporter company manufacturing several chemicals including Tartaric Acid and IP BP Ph Eur USP NF JP ACS AR Analytical Reagent FCC Food Grade, Pharmaceutical Chemicals at best prices. The group has offices and factories in India USA and UAE and toll manufacturers in China and sells to almost every country in the world.
The manufacturing facilities of our partner manufacturers have one or more of FDA-cGMP-GLP certification, ISO-9001 certification, Halal and/or Kosher certification, REACH pre-registration ISO-22000 HACCP. We also allow third party inspection of products offered. We can offer small quantities from laboratory and trial packs to large shipments of container loads of material.
Hazard Statements:
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H335: May cause respiratory irritation.
Signal Word: Warning
Transport Information
DOT USA, TDG Canada & ADR/RID Europe: Not dangerous goods.
IMO/IMDG: Not dangerous goods.
IATA/ICAO: Not dangerous goods.
You may please visit:
Tartaric Acid SDS of Manufacturers
Tartaric Acid IP BP Ph Eur USP NF FCC Food AR ACS Reagenr Grade Manufacturers
CAS Number 87-69-4 Tartaric Acid, EINECS: 201-766-0, Molecular Weight: 150.1, Chemical Formula: C4H6O6
Tartaric Acid USP NF Grade Specifications
C4H6O6 150.09
Butanedioic acid, 2,3-dihydroxy-; Butanedioic acid, 2,3-dihydroxy-, [R-(R*,R*)]-.
Tartaric acid; L -(+)-Tartaric acid CAS 526-83-0 and CAS 87-69-4
Tartaric Acid, dried over phosphorus pentoxide for 3 hours, contains not less than 99.7 percent and not more than 100.5 percent of C4H6O6.
Identification:
A: It responds to the tests for Tartrate.
B: When ignited, it gradually decomposes, emitting an odor resembling that of burning sugar
(distinction from citric acid).
Specific rotation: between +12.0 and +13.0 .
Test solution: 200 mg per mL, in water.
Loss on drying: Dry it over phosphorus pentoxide for 3 hours: it loses not more than 0.5% of its weight.
Residue on ignition: not more than 0.1%.
Limit of oxalate: Nearly neutralize 10 mL of a solution of it (1 in 10) with 6 N ammonium hydroxide, and add 10 mL of calcium sulfate TS: no turbidity is produced.
Sulfate: To 10 mL of a solution (1 in 100) add 3 drops of hydrochloric acid and 1 mL of barium chloride: no turbidity is produced.
Heavy metals: 0.001%.
Tartaric Acid BP Ph Eur Grade Specifications
C4H6O6 --- 150.1--- CAS 87-69-4
Ph Eur
DEFINITION
(2R,3R)-2,3-Dihydroxybutanedioic acid.
Content: 99.5 per cent to 101.0 per cent (dried substance).
CHARACTERS
Appearance: White or almost white, crystalline powder or colourless crystals.
Solubility: Very soluble in water, freely soluble in ethanol (96 per cent).
IDENTIFICATION
A. Solution S (see Tests) is strongly acid.
B. It gives the reactions of tartrates.
TESTS
Solution S: Dissolve 5.0 g in distilled water and dilute to 50 ml with the same solvent.
Appearance of solution: Solution S is clear and not more intensely coloured than reference solution.
Specific optical rotation: + 12.0 to + 12.8 (dried substance)
Oxalic acid: Maximum 350 ppm, calculated as anhydrous oxalic acid.
Chlorides: Maximum 100 ppm.
Sulphates: Maximum 150 ppm.
Calcium: Maximum 200 ppm.
Heavy metals: Maximum 10 ppm.
Loss on drying: Maximum 0.2 per cent, determined on 1.000 g by drying in an oven at 105C
Sulphated ash: Maximum 0.1 per cent, determined on 1.0 g.
Tartaric Acid FCC Food Grade Specifications
L(+)-Tartaric Acid
C4H6O6 Formula wt 150.09
CAS 87-69-4
FEMA: 3044
DESCRIPTION
Tartaric Acid occurs as colorless or translucent crystals or as a white, fine to granular, crystalline powder. It is stable in air. One gram dissolves in 0.8 mL of water at 25C, in about 0.5 mL of boiling water, and in about 3 mL of alcohol. Its solutions are dextrorotatory.
Function: Acidifier; sequestrant; flavoring agent.
REQUIREMENTS
Identification: A sample solution gives positive tests for Tartrate.
Assay: Not less than 99.7% and not more than 100.5% of C4H6O6 after drying.
Lead: Not more than 2 mg/kg.
Loss on Drying: Not more than 0.5%.
Optical (Specific) Rotation: Between +12.0° and +13.0°.
Oxalate: Passes test.
Residue on Ignition: Not more than 0.05%.
Sulfate: Passes test.
Tartaric Acid Analytical Reagent Grade Specifications
2,3-Dihydroxybutanedioic Acid
HOOC(CHOH)2COOH
Formula Weight 150.0
CAS Number 87-69-4
REQUIREMENTS
Assay: Not less than 99.0%
MAXIMUM ALLOWABLE
Insoluble matter: 0.005%
Residue after ignition: 0.02%
Chloride (Cl): 0.001%
Oxalate (C2O4): Passes test
Phosphate (PO4): 0.001%
Sulfur compounds (as SO4): 0.002%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm.
Contact for Monograph, Uses, Matnfacturing Process, etc of Tartaric Acid and JP IP BP Ph Eur USP NF FCC Food AR ACS Reagent Grade Manufacturer Supplier Exporter
MANUFACTURER EXPORTER
MUMBAI 400009, INDIA. TEL: (OFFICE) 91-9322665100
info@manufacturerexporter.com
Copyright and Usual Disclaimer is Applicable
Last updated
11/19/2022
Manufacturer Suppliers Exporters at Wholesale Prices from India USA and around the Globe
Glacial Acetic Acid -- Benzoic Acid -- Boric Acid -- Citric Acid -- Formaldehyde Solution -- Fumaric Acid -- Glutaraldehyde Solution -- Hyaluronic Acid -- Lactic Acid -- Lactobionic Acid -- Maleic Acid -- Malic Acid -- Myristic Acid -- Oleic Acid -- Picric Acid -- Propionic Acid -- Selenious Acid -- Stearic Acid -- Sorbic Acid -- Succinic Acid -- Tartaric Acid Manufacturer -- Undecylenic Acid
Cream of Tartar or Potassium Bitartrate -- Potassium Sodium Tartrate -- Sodium Tartrate --