Crystal Clear Products

MANUFACTURER EXPORTER
Maheboob Mansion, Chinchbunder, Mumbai 400009, India
Tele.: 91-9322665100

Home

Exporter Importer Palletized & Shrink-wrapped for Export Paletized Packing Drums on Palets Drums on Palets Air Cargo Export

Potassium Citrate Manufacturer Exporter IP BP Ph Eur USP FCC Food Grade Manufacturer Exporter

Crystal Clear Products is a manufacturer exporter company manufacturing several chemicals including Potassium Citrate and IP BP Ph Eur USP NF JP ACS AR Analytical Reagent FCC Food Grade, Pharmaceutical Chemicals at best prices. The group has offices and factories in India USA and UAE and toll manufacturers in China and sells to almost every country in the world.

The manufacturing facilities of our partner manufacturers have one or more of FDA-cGMP-GLP certification, ISO-9001 certification, Halal and/or Kosher certification, REACH pre-registration ISO-22000 HACCP. We also allow third party inspection of products offered. We can offer small quantities from laboratory and trial packs to large shipments of container loads of material.

Hazard Statements:
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Not considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200)
Signal Word: None

Transport Information
DOT USA, TDG Canada & ADR/RID Europe
: Not dangerous goods.
IMO/IMDG: Not dangerous goods.
IATA/ICAO: Not dangerous goods.

You may please visit:

Potassium Citrate SDS of Manufacturers

Potassium Citrate IP BP Ph Eur USP NF FCC Food AR ACS Reagenr Grade Manufacturers

Potassium Citrate Manufacturer Exporter

CAS Number 6100-05-6 Potassium Citrate, EINECS: 231-905-0, Molecular Weight: 324.4, Chemical Formula: C6H5K3O7-H2O

Potassium Citrate USP Grade Specifications
C6H5K3O7-H2O 324.41
1,2,3-Propanetricarboxylic acid, 2-hydroxy-, tripotassium salt, monohydrate.
Tripotassium citrate monohydrate CAS 6100-05-6
Anhydrous 306.40 CAS 866-84-2

Potassium Citrate contains not less than 99.0 percent and not more than 100.5 percent of C6H5K3O7, calculated on the dried basis.

Identification— A solution (1 in 10) responds to the tests for Potassium and for Citrate.
Alkalinity— A solution of 1.0 g in 20 mL of water is alkaline to litmus, but after the addition of 0.20 mL of 0.10 N sulfuric acid, no pink color is produced by the addition of 1 drop of PhPh TS.
Loss on drying— Dry it at 180 for 4 hours: it loses between 3.0% and 6.0% of its weight.
Tartrate— To a solution of 1 g in 1.5 mL of water in a test tube add 1 mL of 6 N acetic acid, and scratch the walls of the test tube with a glass rod: no crystalline precipitate is formed.
Heavy metals— Dissolve 2 g in 25 mL of water, and proceed as directed for Test Preparation, except to use glacial acetic acid to adjust the pH: the limit is 0.001%.


Potassium Citrate BP Ph Eur Grade Specifications
C6H5K3O7,H2O -- 324.4 -- CAS 6100-05-6

DEFINITION
Potassium citrate contains not less than 99.0 per cent and not more than the equivalent of 101.0 per cent of tripotassium 2-hydroxypropane-1,2,3-tricarboxylate, calculated with reference to the anhydrous substance.

CHARACTERS
A white, granular powder or transparent crystals, hygroscopic, very soluble in water, practically insoluble in alcohol.

IDENTIFICATION
A. To 1 ml of solution S (see Tests) add 4 ml of water. The solution gives the reaction of citrates.
B. 0.5 ml of solution S gives reaction of potassium.

TESTS
Solution S: Dissolve 10.0 g in carbon dioxide-free water prepared from distilled water and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear and colourless.
Acidity or alkalinity: To 10 ml of solution S add 0.1 ml of PhPh solution. Not more than 0.2 ml of 0.1 M hydrochloric acid or 0.1 M sodium hydroxide is required to change the colour of the indicator.
Readily carbonizable substances: To 0.20 g of the powdered substance to be examined add 10 ml of sulphuric acid and heat in a water-bath at 90 ± 1C for 60 min. Cool rapidly. The solution is not more intensely coloured than reference solution.
Chlorides: Dilute 10 ml of solution S to 15 ml with water. The solution complies with the limit test for chlorides (50 ppm).
Oxalates: Dissolve 0.50 g in 4 ml of water, add 3 ml of hydrochloric acid and 1 g of granulated zinc and heat on a water-bath for 1 min. Allow to stand for 2 min, decant the liquid into a test-tube containing 0.25 ml of a 10 g/l solution of phenylhydrazine hydrochloride and heat to boiling. Cool rapidly, transfer to a graduated cylinder and add an equal volume of hydrochloric acid and 0.25 ml of potassium ferricyanide solution. Shake and allow to stand for 30 min. Any pink colour in the solution is not more intense than that in a standard prepared at the same time and in the same manner using 4 ml of a 0.05 g/l solution of oxalic acid (300 ppm).
Sulphates: To 10 ml of solution S add 2 ml of hydrochloric acid and dilute to 15 ml with distilled water. The solution complies with the limit test for sulphates (150 ppm).
Heavy metals: 12 ml of solution S complies with limit test A for heavy metals (10 ppm).
Sodium: Not more than 0.3 per cent of Na, determined by atomic emission spectrometry.
Water: 4.0 per cent to 7.0 per cent, determined on 0.500 g by the semi-micro determination of water. After adding the substance to be examined, stir for 15 min before titrating.


Potassium Citrate IP Grade
Potassium citrate IP grade is also offered.


Potassium Citrate FCC Food Grade Specifications
Tripotassium Citrate
KOOCCH2C(OH)(COOK)CH2COOK-H2O
C6H5K3O7-H2O Formula weight 324.41
INS: 332(ii) CAS 6100-05-6

DESCRIPTION
Potassium Citrate occurs as transparent crystals or as a white, granular powder. It is deliquescent when exposed to moist air. One gram dissolves in about 0.5 mL of water. It is almost insoluble in alcohol.
Function: Buffer; sequestrant; stabilizer.

REQUIREMENTS
Identification: A 1:20 aqueous solution gives positive tests for Potassium and for Citrate.
Assay: Not less than 99.0% and not more than 100.5% of C6H5K3O7 after drying.
Alkalinity: A 1:20 aqueous solution is alkaline to litmus, but after the addition of 0.2 mL of 0.1 N sulfuric acid to 10 mL of this solution, no pink color appears after the addition of 1 drop of PhPh TS.
Lead: Not more than 2 mg/kg.
Loss on Drying: Between 3.0% and 6.0%.

Contact for Monograph, Uses, Matnfacturing Process, etc of Potassium Citrate and JP IP BP Ph Eur USP NF FCC Food AR ACS Reagent Grade Manufacturer Supplier Exporter

MANUFACTURER EXPORTER
MUMBAI 400009, INDIA. TEL: (OFFICE) 91-9322665100

info@manufacturerexporter.com

Copyright and Usual Disclaimer is Applicable
Last updated 11/19/2022

Manufacturer Suppliers Exporters at Wholesale Prices from India USA and around the Globe
Citric Acid Manufacturer -- Bismuth Citrate -- Bismuth Subcitrate Potassium -- Calcium Citrate -- Ferric Ammonium Citrate -- Ferrous Citrate or Iron Citrate -- Ferric Citrate or Iron Citrate -- Lithium Citrate -- Magnesium Citrate -- Manganese Citrate -- Potassium Citrate -- Monosodium Citrate or Sodium Dihydrogen Citrate -- Disodium Hydrogen Citrate -- Sodium Citrate -- Strontium Citrate -- Triethyl Citrate -- Zinc Citrate

Potassium Acetate -- Potassium Benzoate -- Potassium Chloride -- Potassium Chloride IP BP USP ACS AR Analytical Reagent FCC Food Grade -- Potassium Maleate -- Potassium Malate -- Potassium Oleate -- Cream of Tartar or Potassium Bitartrate -- Potassium Sodium Tartrate -- Potassium Pidolate -- Aluminium Potassium Sulphate or Aluminum Potassium Sulfate or Potash Alum or Potassium Alum --