Potassium Acetate Manufacturer Exporter BP Ph Eur USP AR ACS Grade Manufacturer Exporter
Crystal Clear Products is a manufacturer exporter company manufacturing several chemicals including Potassium Acetate and IP BP Ph Eur USP NF JP ACS AR Analytical Reagent FCC Food Grade, Pharmaceutical Chemicals at best prices. The group has offices and factories in India USA and UAE and toll manufacturers in China and sells to almost every country in the world.
The manufacturing facilities of our partner manufacturers have one or more of FDA-cGMP-GLP certification, ISO-9001 certification, Halal and/or Kosher certification, REACH pre-registration ISO-22000 HACCP. We also allow third party inspection of products offered. We can offer small quantities from laboratory and trial packs to large shipments of container loads of material.
Hazard Statements:
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Not considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200)
Signal Word: NoneTransport Information
DOT USA, TDG Canada & ADR/RID Europe: Not dangerous goods.
IMO/IMDG: Not dangerous goods.
IATA/ICAO: Not dangerous goods.You may please visit:
Potassium Acetate SDS of Manufacturers
Potassium Acetate IP BP Ph Eur USP NF FCC Food AR ACS Reagenr Grade Manufacturers
CAS Number 127-08-2 Potassium Acetate, EINECS: 204-822-2, Molecular Weight: 98.14, Chemical Formula: C2H3O2K
Potassium Acetate USP Grade Specifications
C2H3KO2 98.14
Acetic acid, potassium salt. CAS 127-08-2.Potassium Acetate contains not less than 99.0 percent and not more than 100.5 percent of C2H3KO2, calculated on the dried basis.
Identification: A solution (1 in 10) responds to the tests for Potassium and for Acetate.
pH: between 7.5 and 8.5, in a solution (1 in 20).
Loss on drying: Dry it at 150 for 2 hours: it loses not more than 1.0% of its weight.
Heavy metals: the limit is 0.002%.
Limit of sodium: To pass the test not more than 0.03% of sodium is found.
Potassium Acetate BP Ph Eur Grade Specifications
C2H3O2K -- 98.14 -- CAS 127-08-2DEFINITION
Potassium acetate contains not less than 99.0 per cent and not more than the equivalent of 101.0 per cent of C2H3KO2, calculated with reference to the dried substance.CHARACTERS
A white, crystalline powder or colourless crystals, deliquescent, very soluble in water, freely soluble in alcohol.IDENTIFICATION
A. It gives reaction of acetates.
B. It gives reaction of potassium.TESTS
Solution S: Dissolve 10.0 g in distilled water and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear and colourless.
pH: Dissolve 1.0 g in carbon dioxide-free water and dilute to 20 ml with the same solvent. The pH of the solution is 7.5 to 9.0.
Reducing substances: Dilute 10 ml of solution S to 100 ml with water. Add 5 ml of dilute sulphuric acid and 0.5 ml of a 0.32 g/l solution of potassium permanganate. Mix and boil gently for 5 min. The solution remains pink.
Chlorides: Dilute 2.5 ml of solution S to 15 ml with water. The solution complies with the limit test for chlorides (200 ppm).
Sulphates: Dilute 7.5 ml of solution S to 15 ml with distilled water. The solution complies with the limit test for sulphates (200 ppm).
Aluminium: If intended for use in the manufacture of peritoneal dialysis solutions, haemofiltration solutions or hem dialysis solutions, it complies with the test for aluminium. Dissolve 2.0 g in 50 ml of water and add 5 ml of acetate buffer solution pH 6.0. The solution complies with the limit test for aluminium (1 ppm). Use as a reference solution a mixture of 1 ml of aluminium standard solution (2 ppm Al), 5 ml of acetate buffer solution pH 6.0 R and 49 ml of water. To prepare the blank use a mixture of 5 ml of acetate buffer solution pH 6.0 R and 50 ml of water.
Iron: Dilute 5 ml of solution S to 10 ml with water. The solution complies with the limit test for iron (20 ppm).
Heavy metals: Dissolve 5.0 g in water and dilute to 20 ml with the same solvent. 12 ml of the solution complies with limit test A for heavy metals (4 ppm). Prepare the standard using lead standard solution (1 ppm Pb).
Sodium: Not more than 0.5 per cent of Na, determined by atomic emission
Loss on drying: Not more than 3.0 per cent, determined on 1.000 g by drying in an oven at 100C to 105C.
Potassium Acetate Analytical Reagent
CH3COOK
Formula Weight. 98.14
CAS Number 127-08-2REQUIREMENTS
Assay: 99.0% CH3COOK
pH of a 5% solution: 6.5-9.0 at 25CMAXIMUM ALLOWABLE
Insoluble matter: 0.005%
Chloride (Cl): 0.003%
Phosphate (PO4): 0.001%
Sulfate (SO4): 0.002%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Calcium (Ca): 0.005%
Magnesium (Mg): 0.002%
Sodium (Na): 0.03%Contact for Monograph, Uses, Matnfacturing Process, etc of Potassium Acetate and JP IP BP Ph Eur USP NF FCC Food AR ACS Reagent Grade Manufacturer Supplier Exporter
MANUFACTURER EXPORTER
MUMBAI 400009, INDIA. TEL: (OFFICE) 91-9322665100info@manufacturerexporter.com
Copyright and Usual Disclaimer is Applicable
Last updated 11/19/2022Manufacturer Suppliers Exporters at Wholesale Prices from India USA and around the Globe
Glacial Acetic Acid -- Aluminum Glycinate or Dihydroxy Aluminium Aminoacetate -- Calcium Acetate -- Cobalt Acetate Manufacturer -- Chromium Acetate Manufacturer -- Magnesium Acetate Manufacturer -- Phenylmercuric Acetate Manufacturer -- Potassium Acetate Manufacturer -- Sodium Acetate Trihydrate Anhydrous -- Sodium Acetate IP BP USP ACS AR Analytical Reagent FCC Food Grade -- Sodium Diacetate -- Strontium Acetate -- Sucrose Acetate Isobutyrate -- Polyvinyl Acetate --Potassium Ascorbate -- Potassium Chloride -- Potassium Chloride IP BP USP ACS AR Analytical Reagent FCC Food Grade -- Potassium Citrate -- Potassium Maleate -- Potassium Malate -- Potassium Oleate -- Cream of Tartar or Potassium Bitartrate -- Potassium Sodium Tartrate -- Potassium Pidolate -- Aluminium Potassium Sulphate or Aluminum Potassium Sulfate or Potash Alum or Potassium Alum --