Crystal Clear Products

MANUFACTURER EXPORTER
Maheboob Mansion, Chinchbunder, Mumbai 400009, India
Tele.: 91-9322665100

Home

Exporter Importer Palletized & Shrink-wrapped for Export Paletized Packing Drums on Palets Drums on Palets Air Cargo Export

Aluminum Glycinate or Dihydroxy Aluminium Aminoacetate Manufacturer Exporter BP Ph Eur USP Grade Manufacturer Exporter

Crystal Clear Products is a manufacturer exporter company manufacturing several chemicals including Aluminum Glycinate or Dihydroxy Aluminium Aminoacetate and IP BP Ph Eur USP NF JP ACS AR Analytical Reagent FCC Food Grade, Pharmaceutical Chemicals at best prices. The group has offices and factories in India USA and UAE and toll manufacturers in China and sells to almost every country in the world.

The manufacturing facilities of our partner manufacturers have one or more of FDA-cGMP-GLP certification, ISO-9001 certification, Halal and/or Kosher certification, REACH pre-registration ISO-22000 HACCP. We also allow third party inspection of products offered. We can offer small quantities from laboratory and trial packs to large shipments of container loads of material.

Hazard Statements:
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Not considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200)
Signal Word: None

Transport Information
DOT USA, TDG Canada & ADR/RID Europe
: Not dangerous goods.
IMO/IMDG: Not dangerous goods.
IATA/ICAO: Not dangerous goods.

You may please visit:

Aluminum Glycinate or Dihydroxy Aluminium Aminoacetate SDS of Manufacturers

Aluminum Glycinate or Dihydroxy Aluminium Aminoacetate IP BP Ph Eur USP NF FCC Food AR ACS Reagenr Grade Manufacturers

Aluminum Glycinate Dihydroxy Aluminium Aminoacetate Manufacturer

CAS Number 41354-48-7 or 13682-92-3 Aluminum Glycinate or Dihydroxy Aluminium Aminoacetate, EINECS: 237-193-8, Molecular Weight: 135.06 Anhydrous, Chemical Formula: C2H6AlNO4xH2O

Dihydroxyaluminum Aminoacetate USP Grade Specifications
C2H6AlNO4.xH2O
Aluminum, (glycinato-N,O)dihydroxy-, hydrate.
(Glycinato)dihydroxyaluminum hydrate CAS 41354-48-7
Anhydrous 135.06 CAS 13682-92-3

Dihydroxyaluminum Aminoacetate yields not less than 94.0 percent and not more than 102.0 percent of dihydroxyaluminum aminoacetate (C2H6AlNO4), calculated on the dried basis. It may contain small amounts of aluminum oxide and of Aminoacetic Acid.

Identification: Suspend 1 g in 25 mL of water, add hydrochloric acid, dropwise, until a clear solution is formed, and divide it into two equal parts for the following tests.
A: One portion of the solution responds to the tests for Aluminum.
B: To the other portion of the solution add 1 drop of liquefied phenol and 5 mL of sodium hypochlorite: a blue color is produced.
pH: between 6.5 and 7.5, in a suspension of 1 g of it, finely powdered, in 25 mL of water.
Loss on drying: Dry it at 130C to constant weight: it loses not more than 14.5% of its weight.
Mercury: the limit is 1 ppm.
Isopropyl alcohol: Transfer about 5 g to a flask provided with a reflux condenser, and add 100 mL of potassium permanganate solution (1 in 300) and 10 mL of sulfuric acid. Reflux the mixture for 30 minutes, distill, and collect 10 mL of the distillate. To 1 mL of the distillate add 5 drops of sodium nitroferricyanide and 2 mL of 1 N sodium hydroxide, then add a slight excess of 6 N acetic acid: no red color is produced.
Nitrogen: Not less than 9.90% and not more than 10.60% of nitrogen is found.
Assay: not less than 94.0 percent and not more than 102.0 percent of dihydroxyaluminum aminoacetate (C2H6AlNO4), calculated on the dried basis.


Aluminium Glycinate BP Ph Eur Grade Specifications
C2H6AlNO4,xH2O --- 135.1 --- CAS 41354-48-7
Action and use: Antacid.

DEFINITION
Aluminium Glycinate is a basic aluminium monoglycinate, partly hydrated. It contains not less than 34.5% and not more than 38.5% of Al2O3 and not less than 9.9% and not more than 10.8% of N, both calculated with reference to the dried substance.

CHARACTERISTICS
A white or almost white powder.
Practically insoluble in water and in organic solvents. It dissolves in dilute mineral acids and in aqueous solutions of the alkali hydroxides.

IDENTIFICATION
A. Add 0.1 g to 10 ml of a solution prepared by dissolving 0.84 g of citric acid in 8 ml of 1M sodium hydroxide and diluting to 20 ml with water. Add 0.5 ml of a 0.1% w/v solution of ninhydrin in methanol and warm. A purple colour is produced.
B. Suspend 1 g in 25 ml of 0.5M hydrochloric acid and heat gently until a clear solution is produced. Reserve half of the solution. To 2 ml of the solution add 0.15 ml of liquefied phenol , shake and add carefully without shaking 5 ml of dilute sodium hypochlorite solution. A blue colour is produced.
C. The solution reserved in test B yields the reaction characteristic of aluminium salts.

TESTS
Acidity or alkalinity: pH of a suspension of 1 g in 25 ml of carbon dioxide-free water, 6.5 to 7.5.
Neutralising capacity: Shake 0.2 g vigorously with 25 ml of 0.1M hydrochloric acid for 5 minutes and allow to stand for 5 minutes. The pH of the mixture is greater than 3.0.
Arsenic: Dissolve 2.0 g in 18 ml of brominated hydrochloric acid and 32 ml of water. 25 ml of the resulting solution complies with the limit test for arsenic, 1 ppm.
Heavy metals: Dissolve 1.5 g in 20 ml of 2M hydrochloric acid and 10 ml of water, add 0.5 ml of nitric acid and boil for about 30 seconds. Cool, add 2 g of ammonium chloride and 2 g of ammonium thiocyanate and extract with two 10 ml quantities of a mixture of equal parts of isoamyl alcohol and ether . To the aqueous layer add 2 g of citric acid. 12 ml of the resulting solution complies with limit test A for heavy metals, Appendix VII. Use lead standard solution (1 ppm Pb) to prepare the standard (20 ppm).
Mercuric salts: To pass the test.
Chloride: Dissolve 1.0 g in 10 ml of 2M nitric acid and dilute to 100 ml with water. 15 ml of the resulting solution complies with the limit test for chlorides, Appendix VII (330 ppm).
Loss on drying: When dried to constant weight at 130C, loses not more than 12.0% of its weight. Use 1 g.

Contact for Monograph, Uses, Matnfacturing Process, etc of Aluminum Glycinate or Dihydroxy Aluminium Aminoacetate and JP IP BP Ph Eur USP NF FCC Food AR ACS Reagent Grade Manufacturer Supplier Exporter

MANUFACTURER EXPORTER
MUMBAI 400009, INDIA. TEL: (OFFICE) 91-9322665100

info@manufacturerexporter.com

Copyright and Usual Disclaimer is Applicable
Last updated 11/19/2022

Manufacturer Suppliers Exporters at Wholesale Prices from India USA and around the Globe
Glacial Acetic Acid -- Calcium Acetate -- Cobalt Acetate -- Chromium Acetate -- Magnesium Acetate -- Potassium Acetate -- Sodium Acetate Trihydrate Anhydrous -- Sodium Acetate IP BP USP ACS AR Analytical Reagent FCC Food Grade --

Aluminum Chloride Anhydrous or Aluminium Chloride Hexahydrate -- Aluminum Chlorohydrate or Aluminium Chlorohydrate -- Dihydroxyaluminum Sodium Carbonate -- Dried Aluminium Phosphate -- Aluminum Glycinate or Dihydroxy Aluminium Aminoacetate -- Aluminum Monostearate & Aluminium Distearate -- Aluminum Sulfate or Aluminium Sulphate -- Aluminium Potassium Sulphate or Aluminum Potassium Sulfate or Potash Alum or Potassium Alum -- Magnesium Aluminum Silicate --