Crystal Clear Products

MANUFACTURER EXPORTER
Maheboob Mansion, Chinchbunder, Mumbai 400009, India
Tele.: 91-9322665100

Home

Exporter Importer Palletized & Shrink-wrapped for Export Paletized Packing Drums on Palets Drums on Palets Air Cargo Export

Aluminum Chlorohydrate Aluminium Chlorohydrate Powder Solution Manufacturer Exporter USP Grade Manufacturer Exporter

Crystal Clear Products is a manufacturer exporter company manufacturing several chemicals including Aluminum Chlorohydrate Aluminium Chlorohydrate Powder Solution and IP BP Ph Eur USP NF JP ACS AR Analytical Reagent FCC Food Grade, Pharmaceutical Chemicals at best prices. The group has offices and factories in India USA and UAE and toll manufacturers in China and sells to almost every country in the world.

The manufacturing facilities of our partner manufacturers have one or more of FDA-cGMP-GLP certification, ISO-9001 certification, Halal and/or Kosher certification, REACH pre-registration ISO-22000 HACCP. We also allow third party inspection of products offered. We can offer small quantities from laboratory and trial packs to large shipments of container loads of material.

Aluminum Chloride Hexahydrate or Aluminium Chloride Hexahydrate:
Hazard Statements:

H303: May be harmful if swallowed.
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H335: May cause respiratory irritation.
H402: Harmful to aquatic life.
Irritant

Signal Word: Warning

Transport Information
DOT USA, TDG Canada & ADR/RID Europe
: Not dangerous goods.
IMO/IMDG: Not dangerous goods.
IATA/ICAO: Not dangerous goods.

You may please visit:

Aluminum Chlorohydrate Aluminium Chlorohydrate Powder Solution SDS of Manufacturers

Aluminum Chlorohydrate Aluminium Chlorohydrate Powder Solution IP BP Ph Eur USP NF FCC Food AR ACS Reagenr Grade Manufacturers

Aluminum Chlorohydrate Powder Manufacturer Exporter Aluminum Chlorohydrate Solution Supplier

CAS Number 12042-91-0 Dihydrate 1327-41-9 Anhydrous Aluminum Chlorohydrate Aluminium Chlorohydrate Powder Solution, EINECS: 215-477-2 or 234-933-1, Molecular Weight: Varies, Chemical Formula: AlnCl(3n-m)(OH)m

Aluminum Chlorohydrate USP Grade Specifications:
Aly(OH)3y-zClz.H2O
Aluminum chlorohydroxide.
Aluminum hydroxychloride.
Dihydrate CAS CAS 12042-91-0
Anhydrous CAS CAS 1327-41-9
Aluminum chlorohydroxide, dihydrate.
Aluminum hydroxychloride, dihydrate.
Dihydrate 210.48 CAS 12042-91-0
Anhydrous 174.45 CAS 1327-41-9

Aluminum Chlorohydrate consists of complex basic aluminum chloride that is polymeric and loosely hydrated and encompasses a range of aluminum-to-chloride atomic ratios between 1.91:1 and 2.10:1. It contains the equivalent of not less than 90.0 percent and not more than 110.0 percent of the labeled amount of anhydrous aluminum chlorohydrate.

Labeling: The label states the content of anhydrous aluminum chlorohydrate.
Identification: A solution (1 in 10) responds to the tests for Aluminum and for Chloride.
pH: between 3.0 and 5.0, in a solution [15 in 100 (w/w)].
Arsenic: 2 microgm per gm.
Heavy metals: 0.002%.
Limit of iron: To pass the test --- (150 microgm per gm).
Content of aluminum: To pass the test.
Content of chloride: To pass the test.
Aluminum/chloride atomic ratio: Divide the percentage of aluminum found in the test for Content of aluminum by the percentage of chloride found in the test for Content of chloride, and multiply by 35.453/26.98, in which 35.453 and 26.98 are the atomic weights of chlorine and aluminum, respectively: the ratio is between 1.91:1 and 2.10:1.


Aluminum Chlorohydrate Solution USP Grade Specifications:

Aluminum Chlorohydrate Solution consists of complex basic aluminum chloride that is polymeric and encompasses a range of aluminum-to-chloride ratios between 1.91:1 and 2.10:1. The following solvents may be used: water, propylene glycol, dipropylene glycol, or alcohol. It contains the equivalent of not less than 90.0 percent and not more than 110.0 percent of the labeled concentration of anhydrous aluminum chlorohydrate.

Labeling: Label Solution to state the solvent used and the claimed concentration of anhydrous aluminum chlorohydrate contained therein.
Identification:
A: A solution containing the equivalent of about 100 mg of anhydrous aluminum chlorohydrate per mL responds to the tests for Aluminum and for Chloride.
B: Identification of propylene glycol (where stated on the label): Add about 10 mL of isopropyl alcohol to 2 g of Solution, mix, and filter. Evaporate the filtrate to about 1 mL on a steam bath: the IR spectrum of a film of this solution on a silver chloride disk exhibits maxima only at the same wavelengths as that of a similar preparation of a film of propylene glycol.
C: Identification of dipropylene glycol (where stated on the label): Add about 10 mL of isopropyl alcohol to 2 g of Solution, mix, and filter. Evaporate the filtrate to about 1 mL on a steam bath: the IR spectrum of a film of this solution on a silver chloride disk exhibits maxima only at the same wavelengths as that of a similar preparation of a film of dipropylene glycol.
D: Identification of alcohol (where stated on the label): In a small beaker mix 5 drops of Solution with 1 mL of potassium permanganate solution (1 in 100) and 5 drops of 2 N sulfuric acid. Immediately cover the beaker with filter paper moistened with a freshly prepared solution of 0.1 g of sodium nitroferricyanide and 0.25 g of piperazine in 5 mL of water: an intense blue color is produced on the filter paper, the color fading after a few minutes.
pH: between 3.0 and 5.0, in a solution prepared by diluting 3 g of the solution with water to obtain 10 mL.
Arsenic: The limit is 2 ppm.
Heavy metals: The limit is 0.001%.
Limit of iron: To pass the test --- (75 microgm per gm).
Content of aluminum: To pass the test.
Content of chloride: To pass the test.
Aluminum/chloride atomic ratio: Divide the percentage of aluminum found in the test for Content of aluminum by the percentage of chloride found in the test for Content of chloride, and multiply by 35.453/26.98, in which 35.453 and 26.98 are the atomic weights of chlorine and aluminum, respectively: the ratio is between 1.91:1 and 2.10:1.

Contact for Monograph, Uses, Matnfacturing Process, etc of Aluminum Chlorohydrate Aluminium Chlorohydrate Powder Solution and JP IP BP Ph Eur USP NF FCC Food AR ACS Reagent Grade Manufacturer Supplier Exporter

MANUFACTURER EXPORTER
MUMBAI 400009, INDIA. TEL: (OFFICE) 91-9322665100

info@manufacturerexporter.com

Copyright and Usual Disclaimer is Applicable
Last updated 11/19/2022

Manufacturer Suppliers Exporters at Wholesale Prices from India USA and around the Globe
Aluminum Chloride Anhydrous or Aluminium Chloride Hexahydrate -- Aluminum Chlorohydrate or Aluminium Chlorohydrate -- Dihydroxyaluminum Sodium Carbonate -- Dried Aluminium Phosphate -- Aluminum Glycinate or Dihydroxy Aluminium Aminoacetate -- Aluminum Monostearate & Aluminium Distearate -- Aluminum Sulfate or Aluminium Sulphate -- Aluminium Potassium Sulphate or Aluminum Potassium Sulfate or Potash Alum or Potassium Alum --

Ammonium Chloride Crystals & Blocks -- Ammonium Chloride IP BP USP ACS AR Analytical Reagent FCC Food Grade -- Barium Chloride Anhydrous Dihydrate -- Calcium Chloride Fused Anhydrous Dihydrate Solution -- Calcium Chloride IP BP USP ACS AR Analytical Reagent FCC Food Grade -- Magnesium Chloride Anhydrous Hexahydrate -- Magnesium Chloride IP BP USP ACS AR Analytical Reagent FCC Food Grade -- Potassium Chloride -- Potassium Chloride IP BP USP ACS AR Analytical Reagent FCC Food Grade -- Zinc Chloride -- Magnesium Aluminum Silicate --