|
MANUFACTURER EXPORTER Maheboob Mansion, Chinchbunder, Mumbai 400009, India Tele.: 91-9322665100 |
Aluminum Monostearate & Aluminium Distearate Manufacturer Exporter USP NF Grade Manufacturer Exporter
Crystal Clear Products is a manufacturer exporter company manufacturing several chemicals including Aluminum Monostearate & Aluminium Distearate and IP BP Ph Eur USP NF JP ACS AR Analytical Reagent FCC Food Grade, Pharmaceutical Chemicals at best prices. The group has offices and factories in India USA and UAE and toll manufacturers in China and sells to almost every country in the world.
The manufacturing facilities of our partner manufacturers have one or more of FDA-cGMP-GLP certification, ISO-9001 certification, Halal and/or Kosher certification, REACH pre-registration ISO-22000 HACCP. We also allow third party inspection of products offered. We can offer small quantities from laboratory and trial packs to large shipments of container loads of material.
For Aluminum Monostearate or Aluminium Monostearate:Hazard Statements:
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Not considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200)
Signal Word: None
Transport Information
DOT USA, TDG Canada & ADR/RID Europe: Not dangerous goods.
IMO/IMDG: Not dangerous goods.
IATA/ICAO: Not dangerous goods.
For Aluminum Distearate or Aluminium Distearate:
Hazard Statements:
H319: Causes serious eye irritation.
Signal Word: None
Transport Information
DOT USA, TDG Canada & ADR/RID Europe: Not dangerous goods.
IMO/IMDG: Not dangerous goods.
IATA/ICAO: Not dangerous goods.
Aluminum Monostearate & Aluminium Distearate SDS of Manufacturers
CAS Number 7047-84-9 Aluminum Monostearate, EINECS: 230-325-5, Molecular Weight: 344.47, Chemical Formula: Al(OH)2C18H35O2
CAS Number 300-92-5 Aluminium Distearate, EINECS: --, Molecular Weight: --, Chemical Formula: --
Aluminum Monostearate USP NF Grade Specifications:
Aluminum, dihydroxy(octadecanoato-O-)-.
Dihydroxy(stearato)aluminum --- CAS 7047-84-9.
Aluminum Monostearate is a compound of aluminum with a mixture of solid organic acids obtained from fats and consists chiefly of variable proportions of aluminum monostearate and aluminum monopalmitate. It contains the equivalent of not less than 14.5 percent and not more than 16.5 percent of Al2O3, calculated on the dried basis.
Identification:
A: Heat 1 g with a mixture of 25 mL of water and 5 mL of hydrochloric acid for 1 hour, replacing the water as it evaporates: fatty acids are liberated, floating as an oily layer on the surface of the liquid, and the water layer responds to the tests for.
B: Mix intimately 25 g with 100 mL of ether in a 500-mL flask, add 150 mL of 3 N hydrochloric acid, attach a water-cooled condenser, and heat on a steam bath under reflux for 15 minutes. Cool, and transfer both layers to a separator with the aid of an additional 100 mL of ether. Shake vigorously and allow the layers to separate. Remove the water layer and wash the ether layer with three 30 mL portions of water. Transfer the ether layer to a small beaker, warm on a steam bath until the ether has evaporated and the fatty acids are clear, and dry the acids at 105 for 20 minutes: the solidification temperature of the fatty acids is not below 54C.
Loss on drying: Dry it at 80C for 16 hours: it loses not more than 2.0% of its weight.
Arsenic: -- The limit is 4 ppm.
Heavy metals: -- The limit is 50 micro-gm per g.
Aluminum distearate exists as white powder and is an aluminum salt of stearic acid. In the pharmaceutical industry, it is used as an anticaking agent; colorant; emulsion stabilizer; and viscosity increasing agent. According to the FDA, aluminum stearate is considered safe for general or specific, limited use in food.
Properties and Specifications of Aluminum Distearate or Aluminium Distearate:
Appearance: Colorless or white powder.
Assay: 10.5-12.5 Alumina.
pH: 5.5 to 7.2
Loss on drying: 1.5% maximum at 105C for 3 hours.
Ignition residue: 10% to 12%
Gel Quality: Translucent.
Relative density: around 1.01
Melting point: around 145C literature.
Boiling point: Decomposes.
Solubility: Insoluble in water.
Contact for Monograph, Uses, Matnfacturing Process, etc of Aluminum Monostearate & Aluminium Distearate and JP IP BP Ph Eur USP NF FCC Food AR ACS Reagent Grade Manufacturer Supplier Exporter
MANUFACTURER EXPORTER
MUMBAI 400009, INDIA. TEL: (OFFICE) 91-9322665100
info@manufacturerexporter.com
Copyright and Usual Disclaimer is Applicable
Last updated
11/19/2022
Manufacturer Suppliers Exporters at Wholesale Prices from India USA and around the Globe
Stearic Acid -- Aluminum Monostearate & Aluminium Distearate Manufacturers -- Calcium Stearate -- Glycerol Monostearate -- Glyceryl Palmitostearate -- Magnesium Stearate -- Sodium Stearate -- Sorbitan Monostearate or Sorbitan Stearate -- Zinc Stearate --
Aluminum Chloride Anhydrous or Aluminium Chloride Hexahydrate -- Aluminum Chlorohydrate or Aluminium Chlorohydrate -- Dihydroxyaluminum Sodium Carbonate -- Dried Aluminium Phosphate -- Aluminum Glycinate or Dihydroxy Aluminium Aminoacetate -- Aluminum Monostearate & Aluminium Distearate -- Aluminum Sulfate or Aluminium Sulphate -- Aluminium Potassium Sulphate or Aluminum Potassium Sulfate or Potash Alum or Potassium Alum --