|
MANUFACTURER EXPORTER Maheboob Mansion, Chinchbunder, Mumbai 400009, India Tele.: 91-9322665100 |
Dipotassium Phosphate, Potassium Phosphate Dibasic Manufacturer Exporter
Crystal Clear Products is a manufacturer exporter company manufacturing several chemicals including Dipotassium Phosphate, Potassium Phosphate Dibasic and IP BP Ph Eur USP NF JP ACS AR Analytical Reagent FCC Food Grade, Pharmaceutical Chemicals at best prices. The group has offices and factories in India USA and UAE and toll manufacturers in China and sells to almost every country in the world.
The manufacturing facilities of our partner manufacturers have one or more of FDA-cGMP-GLP certification, ISO-9001 certification, Halal and/or Kosher certification, REACH pre-registration ISO-22000 HACCP. We also allow third party inspection of products offered. We can offer small quantities from laboratory and trial packs to large shipments of container loads of material.
Hazard Statements:
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Not considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200)
Signal Word: None
Transport Information
DOT USA, TDG Canada & ADR/RID Europe: Not dangerous goods.
IMO/IMDG: Not dangerous goods.
IATA/ICAO: Not dangerous goods.
You may please visit:
MSDS of Dibasic Potassium Phosphate IP BP USP NF ACS FCC Food Grade Manufacturer
Dibasic Potassium Phosphate CAS No.: 7758-11-4; Molecular Weight: 174; Chemical Formula: K2HPO4
Dipotassium Phosphate Specifications; Dibasic Potassium Phosphate Dibasic| Appearance | Fine White Crystals |
| Purity on dry basis | 98% min Dipotassium Phosphate |
| Phosphates as P2O5% | 39.5% min |
| pH of 1% solution | 8.7 - 9.3 |
| Heavy Metals | 10 ppm max |
| Arsenic | 4 ppm max |
| Moisture | 5% max |
| Insoluble | 0.1% max |
Dipotassium Hydrogen Phosphate BP
Dipotassium Phosphate BP
K2HPO4 -- 174.2 -- 7758-11-4
Dibasic Potassium Phosphate BP
Potassium Phosphate Dibasic BP
DEFINITION
Dipotassium phosphate contains not less than 98.0 per cent and not more than the equivalent of 101.0 per cent of K2HPO4, calculated with reference to the dried substance.
CHARACTERS
A white powder or colourless crystals, very hygroscopic, very soluble in water, very slightly soluble in alcohol.
IDENTIFICATION
A. Solution S (see Tests) is slightly alkaline
B. Solution S gives reaction of phosphates.
C. Solution S gives reaction of potassium.
TESTS
Solution S
Dissolve 5.0 g in distilled water and dilute to 50 ml with the same solvent.
Appearance of solution
Solution S is clear and colourless.
Reducing substances
Heat on a water-bath for 5 min a mixture of 5 ml of solution S, 5 ml of dilute sulphuric acid and 0.25 ml of 0.02 M potassium permanganate. The solution remains faintly pink.
Chlorides
To 2.5 ml of solution S add 10 ml of dilute nitric acid and dilute to 15 ml with water. The solution complies with the limit test for chlorides (200 ppm).
Sulphates
To 1.5 ml of solution S add 2 ml of dilute hydrochloric acid and dilute to 15 ml with distilled water. The solution complies with the limit test for sulphates (0.1 per cent).
Arsenic
5 ml of solution S complies with limit test A for arsenic (2 ppm).
Iron
10 ml of solution S complies with the limit test for iron (10 ppm).
Heavy metals
Dissolve 2.0 g in 8 ml of water. Acidify with about 6 ml of dilute hydrochloric acid (pH 3 to 4) and dilute to 20 ml with water. 12 ml of the solution complies with limit test A for heavy metals (10 ppm).
Sodium
If intended for use in the manufacture of parenteral dosage forms, it contains not more than 0.1 per cent of Na, determined by atomic emission spectrometry.
Loss on drying
Not more than 2.0 per cent, determined on 1.000 g by drying in an oven at 125C to 130C.
Bacterial endotoxins
Less than 1.1 IU/mg, if intended for use in the manufacture of parenteral dosage forms without a further appropriate procedure for the removal of bacterial endotoxins.
Dipotassium Phosphate USP
Dibasic
Potassium Phosphate USP
Potassium Phosphate Dibasic USP
K2HPO4 174.18
Phosphoric acid, dipotassium salt.
Dipotassium hydrogen phosphate [7758-11-4].
Dibasic Potassium Phosphate contains not less than 98.0 percent and not more than 100.5 percent of K2HPO4, calculated on the dried basis.
Identification— A solution (1 in 20) responds to the tests for Potassium and for Phosphate.
pH: between 8.5 and 9.6, in a solution (1 in 20).
Loss on drying— Dry it at 105 to constant weight: it loses not more than 1.0% of its weight.
Insoluble substances— Dissolve 10 g in 100 mL of hot water, filter through a tarred filtering crucible, wash the insoluble residue with hot water, and dry at 105 for 2 hours: the weight of the residue so obtained does not exceed 20 mg (0.2%).
Carbonate— To 1 g add 3 mL of water and 2 mL of 3 N hydrochloric acid: not more than a few bubbles are evolved.
Chloride— A 1.0-g portion shows no more chloride than corresponds to 0.40 mL of 0.020 N hydrochloric acid (0.03%).
Sulfate— A 0.20-g portion shows no more sulfate than corresponds to 0.20 mL of 0.020 N sulfuric acid (0.1%).
Arsenic: 3 ppm.
Iron— the limit is 0.003%.
Sodium— A solution (1 in 10) tested on a platinum wire imparts no pronounced yellow color to a non-luminous flame.
Heavy metals: the limit is 0.001%.
Limit of fluoride— The limit is 0.001%.
Limit of monobasic or tribasic salt— Dissolve 3 g in 30 mL of water, cool to 20o, and add 3 drops of thymol blue TS: a blue color is produced, which is changed to yellow (with a greenish tinge) by the addition of not more than 0.4 mL of 1 N hydrochloric acid.
Dipotassium Monophosphate; Dipotassium Phosphate FCC
Dibasic Potassium Phosphate FCC Food Grade
K2HPO4 Formula weight 174.18
INS: 340(ii) CAS: [7758-11-4]
DESCRIPTION
Potassium Phosphate, Dibasic, occurs as a colorless or white, granular salt that is deliquescent when exposed to moist air. One gram is soluble in about 3 mL of water. It is insoluble in alcohol. The pH of a 1% solution is about 9.
Function: Buffer; sequestrant; yeast food.
REQUIREMENTS
Identification: A 1:20 aqueous solution gives positive tests for Potassium and for Phosphate.
Assay: Not less than 98.0% of K2HPO4 after drying.
Arsenic: Not more than 3 mg/kg.
Fluoride: Not more than 10 mg/kg.
Insoluble Substances: Not more than 0.2%.
Lead: Not more than 2 mg/kg.
Loss on Drying: Not more than 2.0%.
ACS Specifications
American Chemical Society
Potassium Phosphate Dibasic ACS Analytical Reagent
Dibasic Potassium Phosphate ACS
Dipotassium Phosphate ACS
Dipotassium Hydrogen Phosphate
K2HPO4
Formula Wt 174.18
CAS Number 7758-11-4
REQUIREMENTS
Assay: 98.0% K2HPO4
pH of a 5% solution: 8.5-9.6 at 25C
MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Loss on drying at 105C: 1.0%
Chloride (Cl): 0.003%
Nitrogen compounds (as N): 0.001%
Sulfate (SO4): 0.005%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 0.001%
Sodium (Na): 0.05%
Dipotassium phosphate (K2HPO4) - also phosphoric acid, dipotassium salt; dipotassium hydrogen orthophosphate; potassium phosphate, dibasic - is a highly water-soluble salt which is often used as a fertilizer, food additive and buffering agent. It is a common source of phosphorus and potassium. As a food additive, Dipotassium phosphate is on the FDA's Generally recognized as safe, or GRAS, list of substances. It is used in non-dairy creamers to prevent coagulation. The dipotassium salt, K2HPO4 is used alone or in combination with other phosphate compounds as an electrolyte replenisher.
Potassium Phosphate, Dibasic, Anhydrous (K2HPO4) is a reagent with a very high buffering capacity. Widely used in molecular biology, biochemistry, and chromatography. Neutral potassium phosphate buffer solutions may be prepared with a mixture of the monobasic and dibasic forms to varying degrees, depending on the desired pH. Potassium Phosphate buffers are very useful in numerous applications. It has been used to study the effects of freezing and thawing on the stability of proteins sensitive to conformational changes; it was found that KP buffers offered improved pH stability as opposed to NaP buffers. Potassium Phosphate has also been used for the extraction of keratohyalin protein from bovine tissue.
Contact for Monograph, Uses, Matnfacturing Process, etc of Dipotassium Phosphate, Dibasic Potassium Phosphate and JP IP BP USP NF ACS Analytial Reagent FCC Food Grade Manufacturer Supplier Exporter
MANUFACTURER EXPORTER
MUMBAI 400009, INDIA. TEL: (OFFICE) 91-9322665100
info@manufacturerexporter.com
Copyright and Usual Disclaimer is Applicable
Last updated
11/19/2022
Manufacturer Suppliers Exporters at Wholesale Prices from India USA and around the Globe
Diammonium Phosphate -- Calcium Phosphate Monobasic or Monocalcium Phosphate -- Calcium Phosphate Dibasic or Dicalcium Phosphate -- Calcium Phosphate Tribasic or Tricalcium Phosphate -- Dipotassium Phosphate Manufacturer -- Disodium Phosphate -- Fracturing Gel Breaker -- Monoammonium Phosphate -- Monopotassium Phosphate -- Monosodium Phosphate -- Tripotassium Phosphate -- Trisodium Phosphate -- Dried Aluminium Phosphate --