|
MANUFACTURER EXPORTER Maheboob Mansion, Chinchbunder, Mumbai 400009, India Tele.: 91-9322665100 |
Disodium Phosphate, Sodium Phosphate Dibasic Manufacturer Exporter
Crystal Clear Products is a manufacturer exporter company manufacturing several chemicals including Disodium Phosphate, Sodium Phosphate Dibasic and IP BP Ph Eur USP NF JP ACS AR Analytical Reagent FCC Food Grade, Pharmaceutical Chemicals at best prices. The group has offices and factories in India USA and UAE and toll manufacturers in China and sells to almost every country in the world.
The manufacturing facilities of our partner manufacturers have one or more of FDA-cGMP-GLP certification, ISO-9001 certification, Halal and/or Kosher certification, REACH pre-registration ISO-22000 HACCP. We also allow third party inspection of products offered. We can offer small quantities from laboratory and trial packs to large shipments of container loads of material.
Hazard Statements:
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Not considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200)
Signal Word: None
Transport Information
DOT USA, TDG Canada & ADR/RID Europe: Not dangerous goods.
IMO/IMDG: Not dangerous goods.
IATA/ICAO: Not dangerous goods.
You may please visit:
MSDS of Dibasic Sodium Phosphate Manufacturer
Dibasic Sodium Phosphate Dodecahydrate CAS No.: 10039-32-4; Molecular Weight: 358.14; Chemical Formula: Na2HPO4.12H2O
Dibasic Sodium Phosphate Dibasic
Di-Sodium Phosphate or Disodium Phosphate (Na2HPO4, DSP) or disodium phosphate or dibasic sodium phosphate or sodium phosphate dibasic is a sodium salt of phosphoric acid. It is a white powder that is highly hygroscopic and water soluble. Disodium phosphate is therefore used commercially as an anti-caking additive in powdered products. It is also known as Di sodium hydrogen orthophosphate, sodium hydrogen phosphate or sodium phosphate dibasic. Sodium Phosphate Dibasic is commercially available in both the hydrated and anhydrous forms.
Other uses
Disodium phosphate DSP or Sodium Phosphate Dibasic can be used in cream of wheat to quicken cook time.
Disodium phosphate DSP or Sodium Phosphate Dibasic is used in conjunction with TSP in many steam boiler applications. Sodium Phosphate Dibasic supplies the inventory of free phosphates to retard calcium scale formation.
| Specification | Disodium Phosphate Crystals Sodium Phosphate Dibasic |
Disodium Phosphate Anhydrous Sodium Phosphate Dibasic |
| P2O5 content Assay Loss on Drying pH of 2% Solution Insoluble Packing |
19% 98% 57-61% 8.9-9.5 0.025% 50 Kg HDPE Bags |
49.5% 98.0% 1% 8.9-9.5 0.05% 50 Kg HDPE Bags |
Sodium Phosphate Dibasic, Heptahydrate ACS Analytical Reagent
Disodium Hydrogen Phosphate Heptahydrate ACS
Na2HPO4-7H2O
Formula Wt 268.07
CAS Number 7782-85-6
REQUIREMENTS
Assay: 98.0-102.0% Na2HPO4-7H2O
pH of a 5% solution: 8.7-9.3 at 25C
MAXIMUM ALLOWABLE
Insoluble matter: 0.005%
Chloride (Cl): 0.001%
Nitrogen compounds (as N): 0.001%
Sulfate (SO4): 0.005%
Heavy metals (as Pb): 0.001%
Iron (Fe): 0.001%
Reagent Chemicals
ACS Specifications
Disodium Hydrogen Phosphate ACS
(suitable for buffer solutions)
Na2HPO4
Formula Wt 141.96
CAS Number 7558-79-4
REQUIREMENTS
Assay: 99.0% Na2HPO4 min
pH of a 5% solution: 8.7-9.3 at 25C
MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Loss on drying at 105C: 0.2%
Chloride (Cl): 0.002%
Nitrogen compounds (as N): 0.002%
Sulfate (SO4): 0.005%
Heavy metals (as Pb): 0.001%
Iron (Fe): 0.002%
Dibasic Sodium Phosphate USP NF
Dibasic Sodium Phosphate
Na2HPO4·xH2O (anhydrous) 141.96
Phosphoric acid, disodium salt, dodecahydrate.
Disodium hydrogen phosphate, dodecahydrate 358.14 [10039-32-4]
Phosphoric acid, disodium salt, heptahydrate.
Disodium hydrogen phosphate heptahydrate 268.07 [7782-85-6]
Phosphoric acid, disodium salt, dihydrate.
Disodium hydrogen phosphate, dihydrate 177.99 [10028-24-7]
Phosphoric acid, sodium salt, monohydrate.
Disodium hydrogen phosphate, monohydrate 159.94 [118830-14-1]
Phosphoric acid, disodium salt, hydrate.
Disodium hydrogen phosphate hydrate [10140-65-5]
Anhydrous [7558-79-4]
Dibasic Sodium Phosphate is dried or contains one, two, seven, or twelve molecules of water of hydration. It contains not less than 98.0 percent and not more than 100.5 percent of Na2HPO4, calculated on the dried basis.
Identification A solution (the equivalent of 1 part of Na2HPO4 in 30) responds to the tests for Sodium and for Phosphate.
Loss on drying Dry it at 130 to constant weight: the dried form loses not more than 5.0% of its weight, the monohydrate loses between 10.3% and 12.0% of its weight, the dehydrate loses between 18.5% and 21.5% of its weight, the heptahydrate loses between 43.0% and 50.0% of its weight, and the dodecahydrate loses between 55.0% and 64.0% of its weight.
Insoluble substances Dissolve the equivalent of 5.0 g of Na2HPO4 in 100 mL of hot water, filter through a tarred filtering crucible, wash the insoluble residue with hot water, and dry at 105 for 2 hours: the weight of the residue so obtained does not exceed 20 mg (0.4%).
Chloride A portion equivalent to 0.5 g of Na2HPO4 shows no more chloride than corresponds to 0.42 mL of 0.020 N hydrochloric acid (0.06%).
Sulfate A portion equivalent to 0.1 g of Na2HPO4 shows no more sulfate than corresponds to 0.2 mL of 0.020 N sulfuric acid (0.2%).
Arsenic the limit is 16 ppm.
Heavy metalsthe limit is 0.002%.
Sodium Phosphate Dibasic FCC Food Grade
Disodium Monohydrogen Phosphate; Disodium Phosphate
Na2HPO4 Formula wt, anhydrous 141.96
Na2HPO4·2H2O Formula wt, dihydrate 177.99
INS: 339(ii) CAS: anhydrous [7558-79-4]
CAS: dihydrate [10028-24-7]
DESCRIPTION
Sodium Phosphate, Dibasic, occurs as a white, crystalline powder or as granules. It may be anhydrous or contain two molecules of water of hydration. The anhydrous form is hygroscopic. Both forms are freely soluble in water and insoluble in alcohol.
Function: Emulsifier; texturizer; buffer; nutrient.
REQUIREMENTS
Identification: A 1:20 aqueous solution gives positive tests for Phosphate and for Sodium.
Assay: Not less than 98.0% of Na2HPO4 after drying.
Arsenic: Not more than 3 mg/kg.
Fluoride: Not more than 0.005%.
Insoluble Substances: Not more than 0.2%.
Lead: Not more than 4 mg/kg.
Loss on Drying Anhydrous: Not more than 5.0%; Dihydrate: Between 18.0% and 22.0%.
Contact for Monograph, Uses, Matnfacturing Process, etc of Disodium Phosphate, Dibasic Sodium Phosphate and JP IP USP NF ACS Analytical Reagent FCC Food Grade Manufacturer Supplier Exporter
MANUFACTURER EXPORTER
MUMBAI 400009, INDIA. TEL: (OFFICE) 91-9322665100
info@manufacturerexporter.com
Copyright and Usual Disclaimer is Applicable
Last updated
11/19/2022
Manufacturer Suppliers Exporters at Wholesale Prices from India USA and around the Globe
Diammonium Phosphate -- Calcium Phosphate Monobasic or Monocalcium Phosphate -- Calcium Phosphate Dibasic or Dicalcium Phosphate -- Calcium Phosphate Tribasic or Tricalcium Phosphate -- Dipotassium Phosphate -- Disodium Phosphate Manufacturer -- Fracturing Gel Breaker -- Monoammonium Phosphate -- Monopotassium Phosphate -- Monosodium Phosphate -- Tripotassium Phosphate -- Trisodium Phosphate -- Dried Aluminium Phosphate --