|
MANUFACTURER EXPORTER Maheboob Mansion, Chinchbunder, Mumbai 400009, India Tele.: 91-9322665100 |
Monosodium Phosphate, Sodium Phosphate Monobasic Manufacturer Exporter
Crystal Clear Products is a manufacturer exporter company manufacturing several chemicals including Monosodium Phosphate, Sodium Phosphate Monobasic and IP BP Ph Eur USP NF JP ACS AR Analytical Reagent FCC Food Grade, Pharmaceutical Chemicals at best prices. The group has offices and factories in India USA and UAE and toll manufacturers in China and sells to almost every country in the world.
The manufacturing facilities of our partner manufacturers have one or more of FDA-cGMP-GLP certification, ISO-9001 certification, Halal and/or Kosher certification, REACH pre-registration ISO-22000 HACCP. We also allow third party inspection of products offered. We can offer small quantities from laboratory and trial packs to large shipments of container loads of material.
Hazard Statements:
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Not considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200)
Signal Word: None
Transport Information
DOT USA, TDG Canada & ADR/RID Europe: Not dangerous goods.
IMO/IMDG: Not dangerous goods.
IATA/ICAO: Not dangerous goods.
You may please visit:
MSDS of Monosodium Phosphate, Sodium Phosphate Monobasic Manufacturer
CAS No.: Monobasic Sodium Phosphate (monohydrate) 10049-21-5, Molecular Weight: 137.99, Chemical Formula: NaH2PO4.H2O
CAS No.: Monobasic Sodium Phosphate (anhydrous) 7558-80-7, Molecular
Weight: 119.98, Chemical Formula: NaH2PO4
Monobasic Sodium Phosphate Monobasic
Mono Sodium Phosphate or Monosodium Phosphate (NaH2PO4, MSP), also known as anhydrous monobasic sodium phosphate or monosodium phosphate or sodium phosphate monobasic, is used as a laxative and, in combination with other sod. phos., as a pH buffer.
The pKa is 7.20. The sodium chloride equivalent value, or E-Value, is 0.49. It is soluble in 4.5 parts water. Monosodium phosphate is most commonly available as colorless crystals or a white powder. Sodium phosphate monobasic is insoluble in alcohol.
| Specification | Monosodium Phosphate Crystals Sodium Phosphate Monobasic |
Monosodium Phosphate Anhydrous Sodium Phosphate Monobasic |
| P2O5 Content Assay Loss on Drying pH of 2% Solution Insoluble |
44% 98% Less than 24% 4.4-5 0.025% |
59% 98% 1% 4.4-5 0.5% |
Sodium Phosphate Monobasic ACS Analytical Reagent
Reagent Chemicals
ACS Specificatios
Sodium Phosphate, Monobasic, Monohydrate
Sodium Dihydrogen Phosphate Monohydrate
NaH2PO4 . H2O
Formula Wt 137.99
CAS Number 10049-21-5
REQUIREMENTS
Assay: 98.0-102.0% NaH2PO4 - H2O
pH of a 5% solution: 4.1-4.5 at 25C
MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Chloride (Cl): 5 ppm
Nitrogen compounds (as N): 0.001%
Sulfate (SO4): 0.003%
Calcium (Ca): 0.005%
Potassium (K): 0.01%
Heavy metals (as Pb): 0.001%
Iron (Fe): 0.001%
Sodium Dihydrogen Phosphate Monohydrate BP
NaH2PO4,H2O -- 138.0 -- 10049-21-5
Action and use
Excipient.
DEFINITION
Sodium Dihydrogen Phosphate Monohydrate contains not less than 98.0% and not more than 100.5% of NaH2PO4, calculated with reference to the dried substance.
CHARACTERISTICS
Colourless crystals or a white powder.
Very soluble in water; very slightly soluble in ethanol (96%).
Dissolve 10.0 g in sufficient carbon dioxide-free water prepared from distilled water to produce 100 ml (solution S).
IDENTIFICATION
A. Solution S is faintly acid.
B. Solution S yields the reactions characteristic of phosphates.
C. Solution S neutralized with a 10% w/v solution of potassium hydroxide yields reaction A characteristic of sodium salts.
D. Complies with the test for Loss on drying.
TESTS
Acidity
pH of a mixture of 5 ml of solution S and 5 ml of carbon dioxide-free water , 4.2 to 4.5.
Clarity and colour of solution
Solution S is clear and colourless.
Arsenic
0.5 g complies with the limit test for arsenic - 2 ppm.
Heavy metals
12 ml of solution S complies with limit test A for heavy metals. Use lead standard solution (1 ppm Pb) to prepare the standard (10 ppm).
Iron
10 ml of solution S complies with the limit test for - iron 10 ppm.
Chloride
Dilute 2.5 ml of solution S to 15 ml with water. The resulting solution complies with the limit test for chlorides - 200 ppm.
Sulphate
To 5 ml of solution S add 0.5 ml of hydrochloric acid and dilute to 15 ml with distilled water. The resulting solution complies with the limit test for sulphate - 300 ppm.
Reducing substances
To 5 ml of solution S add 0.25 ml of 0.02M potassium permanganate and 5 ml of 1M sulphuric acid and heat in a water bath for 5 minutes. The solution retains a slight red colour.
Loss on drying
When dried to constant weight at 130°, loses 11.5 to 14.5% of its weight. Use 0.5 g.
Monobasic Sodium Phosphate USP NF
Monobasic Sodium Phosphate
NaH2PO4·xH2O
(anhydrous) 119.98
Phosphoric acid, monosodium salt, monohydrate.
Monosodium phosphate monohydrate 137.99 [10049-21-5]
Phosphoric acid, monosodium salt, dihydrate
Monosodium phosphate dihydrate 156.01 [13472-35-0]
Anhydrous [7558-80-7]
Monobasic Sodium Phosphate contains one or two molecules of water of hydration, or is anhydrous. It contains not less than 98.0 percent and not more than 103.0 percent of NaH2PO4, calculated on the anhydrous basis.
Identification— A solution (1 in 20) responds to the tests for Sodium 191 and for Phosphate.
pH: between 4.1 and 4.5, in a solution containing the equivalent of 1.0 g of NaH2PO4·H2O in 20 mL of water.
Water: less than 2.0% (anhydrous form); between 10.0% and 15.0% (monohydrate); between 18.0% and 26.5% (dihydrate).
Insoluble substances— Dissolve a portion equivalent to 10.0 g of NaH2PO4·H2O in 100 mL of hot water, filter through a tarred filtering crucible, wash the insoluble residue with hot water, and dry at 105C for 2 hours: the weight of the residue so obtained does not exceed 20 mg (0.2%).
Chloride— A portion equivalent to 1.0 g of NaH2PO4·H2O shows no more chloride than corresponds to 0.20 mL of 0.020 N hydrochloric acid (0.014%).
Sulfate— A portion equivalent to 0.20 g of NaH2PO4·H2O shows no more sulfate than corresponds to 0.30 mL of 0.020 N sulfuric acid (0.15%).
Aluminum, calcium, and related elements— A solution containing the equivalent of 1.0 g of NaH2PO4·H2O in 10 mL of water does not become turbid when rendered slightly alkaline to litmus paper with 6 N ammonium hydroxide.
Arsenic—the limit is 8 ppm.
Heavy metals—the limit is 0.002%.
Sodium Phosphate Monobasic FCC Food Grade
Monosodium Phosphate; Sodium Biphosphate;
Monosodium Dihydrogen Phosphate
NaH2PO4 Formula wt, anhydrous 119.98
NaH2PO4·H2O Formula wt, monohydrate 137.99
INS: 339(i) CAS: anhydrous [7558-80-7]
CAS: monohydrate [10049-21-5]
DESCRIPTION
Sodium Phosphate, Monobasic, is anhydrous or contains one or two molecules of water of hydration and is slightly hygroscopic. The anhydrous form occurs as a white, crystalline powder or granules. The hydrated forms occur as white or transparent crystals or granules. All forms are freely soluble in water, but are insoluble in alcohol. The pH of a 1:100 solution is between 4.1 and 4.7.
Function: Buffer; emulsifier; nutrient.
REQUIREMENTS
Identification: A 1:20 aqueous solution gives positive tests for Phosphate and for Sodium.
Assay: Not less than 98.0% and not more than 103.0% of NaH2:PO4 after drying.
Arsenic: Not more than 3 mg/kg.
Fluoride: Not more than 0.005%.
Insoluble Substances: Not more than 0.2%.
Lead: Not more than 4 mg/kg.
Loss on Drying Anhydrous: Not more than 2.0%; Monohydrate: Between 10.0% and 15.0%; Dihydrate: Between 20.0% and 25.0%.
Contact for Monograph, Uses, Matnfacturing Process, etc of Monosodium Phosphate, Monobasic Sodium Phosphate and JP IP USP NF ACS Analytical Reagent FCC Food Grade Manufacturer Supplier Exporter
MANUFACTURER EXPORTER
MUMBAI 400009, INDIA. TEL: (OFFICE) 91-9322665100
info@manufacturerexporter.com
Copyright and Usual Disclaimer is Applicable
Last updated
11/19/2022
Manufacturer Suppliers Exporters at Wholesale Prices from India USA and around the Globe
Ammonium Persulphate -- Calcium Phosphate Monobasic or Monocalcium Phosphate -- Calcium Phosphate Dibasic or Dicalcium Phosphate -- Calcium Phosphate Tribasic or Tricalcium Phosphate -- Diammonium Phosphate -- Dipotassium Phosphate -- Disodium Phosphate -- Fracturing Gel Breaker -- Monoammonium Phosphate Monopotassium Phosphate -- Monosodium Phosphate Manufacturer -- Sodium Hydroxymethanesulfonate Formaldehyde Bisulfite -- Tripotassium Phosphate -- Trisodium Phosphate -- Zinc Chloride -- Dried Aluminium Phosphate --