|
MANUFACTURER EXPORTER Maheboob Mansion, Chinchbunder, Mumbai 400009, India Tele.: 91-9322665100 |
Sodium Carbonate Manufacturer Anhydrous Monohydrate Decahydrate Exporter IP BP Ph Eur USP NF FCC Food AR ACS Grade Manufacturer Exporter
Crystal Clear Products is a manufacturer exporter company manufacturing several chemicals including Sodium Carbonate Anhydrous Monohydrate Decahydrate and IP BP Ph Eur USP NF JP ACS AR Analytical Reagent FCC Food Grade, Pharmaceutical Chemicals at best prices. The group has offices and factories in India USA and UAE and toll manufacturers in China and sells to almost every country in the world.
The manufacturing facilities of our partner manufacturers have one or more of FDA-cGMP-GLP certification, ISO-9001 certification, Halal and/or Kosher certification, REACH pre-registration ISO-22000 HACCP. We also allow third party inspection of products offered. We can offer small quantities from laboratory and trial packs to large shipments of container loads of material.
Hazard Statements:
H316: Causes mild skin irritation.
H319: Causes serious eye irritation.
Signal Word: Warning
Transport Information
DOT USA, TDG Canada & ADR/RID Europe: Not dangerous goods.
IMO/IMDG: Not dangerous goods.
IATA/ICAO: Not dangerous goods.
You may please visit:
Sodium Carbonate Anhydrous Monohydrate Decahydrate SDS of Manufacturers
CAS Number 497-19-8 Anhydrous 5698-11-6 Monohydrate 6132-02-1 Decahydrate Sodium Carbonate, Molecular Weight: 105.99 Anhydrous, Chemical Formula: Na2CO3 Anhydrous
Sodium Carbonate USP NF Grade Specifications
Na2CO3 (anhydrous) 105.99
Disodium carbonate CAS 497-19-8
Monohydrate 124.00 CAS 5968-11-6
It is anhydrous or contains one molecule of water of hydration. It contains not less than 99.5 percent and not more than 100.5 percent of Na2CO3, calculated on the anhydrous basis.
Identification: It responds to the tests for Sodium 191 and for Carbonate.
Water: Dry about 2 g, accurately weighed, at 105 for 4 hours: the anhydrous form loses not more than 0.5%, and the hydrous form between 12.0% and 15.0%, of its weight.
Heavy metals: the limit is 0.001%.
Sodium Carbonate Decahydrate BP Ph Eur Grade Specifications
Na2CO3-10H2O -- 286.1 -- CAS 497-19-8
DEFINITION
Content: 36.7 per cent to 40.0 per cent of Na2CO3.
CHARACTERS
Appearance: White or almost white, crystalline powder or colourless, transparent crystals, efflorescent.
Solubility: Freely soluble in water, practically insoluble in ethanol (96 per cent).
IDENTIFICATION
A. Dissolve 1 g in water R and dilute to 10 ml with the same solvent. The solution is strongly alkaline.
B. The solution prepared for identification test A gives the reaction of carbonates.
C. The solution prepared for identification test A gives reaction of sodium.
TESTS
Solution S: Dissolve 5.0 g in portions in a mixture of 5 ml of hydrochloric acid and 25 ml of distilled water. Heat the solution to boiling and cool. Add dilute sodium hydroxide solution until the solution is neutral and dilute to 50 ml with distilled water.
Appearance of solution: The solution is clear and not more intensely coloured than reference.
Dissolve 4.0 g in 10 ml of water.
Alkali hydroxides and bicarbonates: Dissolve 1.0 g in 20 ml of water, add 20 ml of barium chloride solution and filter. To 10 ml of the filtrate add 0.1 ml of PhPh solution. The solution does not become red. Heat the remainder of the filtrate to boiling for 2 min. The solution remains clear.
Chlorides: Maximum 50 ppm.
Sulphate: Maximum 100 ppm, determined on solution S.
Arsenic: Maximum 2 ppm, determined on 5 ml of solution S.
Iron: Maximum 20 ppm.
Heavy metals: Maximum 20 ppm.
Sodium Carbonate Monohydrate BP Ph Eur Grade Specifications
Na2CO3-H2O -- 124.0 -- CAS 5698-11-6
DEFINITION
Content: 83.0 per cent to 87.5 per cent of Na2CO3.
CHARACTERS
Appearance: White or almost white, crystalline powder or colourless crystals.
Solubility: Freely soluble in water, practically insoluble in ethanol (96 per cent).
IDENTIFICATION
A. Dissolve 1 g in water R and dilute to 10 ml with the same solvent. The solution is strongly alkaline.
B. The solution prepared for identification test A gives the reaction of carbonates.
C. The solution prepared for identification test A gives reaction of sodium.
TESTS
Solution S: Dissolve 2.0 g in portions in a mixture of 5 ml of hydrochloric acid and 25 ml of distilled water. Heat the solution to boiling and cool. Add dilute sodium hydroxide solution until the solution is neutral and dilute to 50 ml with distilled water.
Appearance of solution: The solution is clear and not more intensely coloured than reference solution.
Dissolve 2.0 g in 10 ml of water.
Alkali hydroxides and bicarbonates: Dissolve 0.4 g in 20 ml of water R, add 20 ml of barium chloride solution and filter. To 10 ml of the filtrate add 0.1 ml of PhPh solution. The solution does not become red. Heat the remainder of the filtrate to boiling for 2 min. The solution remains clear.
Chlorides: Maximum 125 ppm.
Sulphate: Maximum 250 ppm, determined on solution S.
Arsenic: Maximum 5 ppm, determined on 5 ml of solution S.
Iron: Maximum 50 ppm.
Dilute 5 ml of solution S to 10 ml with water.
Heavy metals: Maximum 50 ppm.
Sodium Carbonate FCC Food Grade Specifications
Soda Ash
Na2CO3 Formula weight, anhydrous 105.99
Na2CO3-H2O Formula weight, monohydrate 124.00
Na2CO3-10H2O Formula weight, Decahydrate 286.14
INS: 500(i) CAS: anhydrous CAS 497-19-8
CAS: monohydrate CAS 5968-11-6
CAS: decahydrate CAS 6132-02-1
DESCRIPTION
It occurs as colorless crystals or as a white, granular or crystalline powder. It is anhydrous or may contain 1 or 10 molecules of water of hydration. It is freely soluble in water and insoluble in ethanol. Its solutions are alkaline to litmus. The anhydrous salt is hygroscopic, and the two hydrates are efflorescent. The decahydrate melts at about 32C.
Function: pH control.
REQUIREMENTS
Identification: A sample gives positive tests for Sodium and for Carbonate.
Assay: Not less than 99.5% and not more than 100.5% of Na2CO3 after drying.
Lead: Not more than 4 mg/kg.
Loss on Drying Anhydrous: Not more than 1%; Monohydrate: Between 12.0% and 15.0%; Decahydrate: Between 55.0% and 65.0%.
Sodium Carbonate Monohydrate Analytical Reagent Grade Specifications
Na2CO3-H2O
Formula Weight 124.00
CAS Number 5968-11-6
REQUIREMENTS
Assay: 99.5% Na2CO3-H2O min
Loss on drying at 150C: 13.0-15.0%
MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Chloride (Cl): 0.001%
Nitrogen compounds (as N): 0.001%
Phosphate (PO4): 5 ppm
Silica (SiO4): 0.005%
Sulfur compounds (as SO4): 0.004%
Ammonium hydroxide precipitate .. 0.01%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Calcium (Ca): 0.03%
Magnesium (Mg): 0.005%
Potassium (K): 0.005%
Sodium Carbonate Anhydrous Analytical Reagent Grade Specifications
Na2CO3
Formula Weight 105.99
CAS Number 497-19-8
REQUIREMENTS
Assay (dried basis) min. 99.5% Na2CO3
MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Loss on heating at 285C: 1.0%
Chloride (Cl): 0.001%
Nitrogen compounds (as N): 0.001%
Phosphate (PO4): 0.001%
Silica (SiO4): 0.005%
Sulfur compounds (as SO4): 0.003%
Ammonium hydroxide precipitate: 0.01%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Calcium (Ca): 0.03%
Magnesium (Mg): 0.005%
Potassium (K): 0.005%
Sodium Carbonate Alkalimetric Standard Analytical Reagent Specifications
Na2CO3
Formula Weight 105.99
CAS Number 497-19-8
NOTE. For use as an alkalimetric standard this reagent should be heated at 285C for 2h.
REQUIREMENTS
Assay (dried basis): 99.95-100.05% Na2CO3
MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Loss on heating at 285C: 1.0%
Chloride (Cl): 0.001%
Nitrogen compounds (as N): 0.001%
Phosphate (PO4): 0.001%
Silica (SiO4): 0.005%
Sulfur compounds (as SO4): 0.003%
Ammonium hydroxide precipitate: 0.01%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Potassium (K): 0.005%
Calcium (Ca): 0.02%
Magnesium (Mg): 0.004%.
Contact for Monograph, Uses, Matnfacturing Process, etc of Sodium Carbonate Anhydrous Monohydrate Decahydrate and JP IP BP Ph Eur USP NF FCC Food AR ACS Reagent Grade Manufacturer Supplier Exporter
MANUFACTURER EXPORTER
MUMBAI 400009, INDIA. TEL: (OFFICE) 91-9322665100
info@manufacturerexporter.com
Copyright and Usual Disclaimer is Applicable
Last updated
11/19/2022
Manufacturer Suppliers Exporters at Wholesale Prices from India USA and around the Globe
Ammonium Bicarbonate -- Ammonium Carbonate -- Bismuth Subcarbonate -- Calcium Carbonate -- Potassium Bicarbonate -- Potassium Carbonate -- Propylene Carbonate -- Zinc Carbonate --
Sodium Acetate Trihydrate Anhydrous -- Sodium Acetate IP BP USP ACS AR Analytical Reagent FCC Food Grade -- Sodium Adipate -- Sodium Alginate -- Sodium Ascorbate -- Sodium Benzoate -- Sodium Bicarbonate -- Sodium Bromate -- Sodium Bromide -- Sodium Butyrate -- Sodium Butyl hydroxybenzoate or Sodium Butylparaben -- Sodium Carbonate -- Monosodium Citrate or Sodium Dihydrogen Citrate -- Disodium Hydrogen Citrate -- Sodium Citrate -- Sodium Ethyl Hydroxybenzoate or Sodium Ethylparaben -- Sodium Formate -- Sodium Hyaluronate -- Sodium Hydroxide Pellets-- Sodium Lactate -- Sodium lactobionate -- Sodium Lauryl Sulfate or Sodium Lauryl Sulphate -- Sodium Malate -- Sodium Methyl Hydroxybenzoate or Sodium Methylparaben -- Sodium Oleate -- Sodium Persulfate -- Sodium Polystyrene Sulfonate -- Sodium Propyl Hydroxybenzoate or Sodium Propylparaben -- Sodium Selenite -- Sodium Selenate -- Sodium Stearate -- Sodium Succinate -- L-Selenomethionine -- Sodium Tartrate -- Sodium Thiosulfate Thiosulphate Pentahydrate Anhydrous -- Sodium Thiosulphate Thiosulfate IP BP USP ACS AR Analytical Reagent FCC Food Grade -- Sodium Diacetate -- Sodium Erythorbate -- Sodium Propionate -- Sodium Hydroxymethanesulfonate Formaldehyde Bisulfite --