|
MANUFACTURER EXPORTER Maheboob Mansion, Chinchbunder, Mumbai 400009, India Tele.: 91-9322665100 |
Potassium Bromide Manufacturer Exporter BP Ph Eur USP AR ACS Grade Manufacturer Exporter
Crystal Clear Products is a manufacturer exporter company manufacturing several chemicals including Potassium Bromide and IP BP Ph Eur USP NF JP ACS AR Analytical Reagent FCC Food Grade, Pharmaceutical Chemicals at best prices. The group has offices and factories in India USA and UAE and toll manufacturers in China and sells to almost every country in the world.
The manufacturing facilities of our partner manufacturers have one or more of FDA-cGMP-GLP certification, ISO-9001 certification, Halal and/or Kosher certification, REACH pre-registration ISO-22000 HACCP. We also allow third party inspection of products offered. We can offer small quantities from laboratory and trial packs to large shipments of container loads of material.
Hazard Statements:
H319: Causes serious eye irritation.
Signal Word: Warning
Transport Information
DOT USA, TDG Canada & ADR/RID Europe: Not dangerous goods.
IMO/IMDG: Not dangerous goods.
IATA/ICAO: Not dangerous goods.
You may please visit:
Potassium Bromide SDS of Manufacturers
Potassium Bromide IP BP Ph Eur USP NF FCC Food AR ACS Reagenr Grade Manufacturers
CAS Number 7758-02-3 Potassium Bromide, EINECS: 231-830-3, Molecular Weight: 119, Chemical Formula: KBr
Potassium Bromide BP Ph Eur Grade Specifications
DEFINITION
Content: 98.0 per cent to 100.5 per cent (dried substance).
CHARACTERS
Appearance: White or almost white, crystalline powder or colourless crystals.
Solubility: Freely soluble in water and in glycerol, slightly soluble in alcohol.
IDENTIFICATION
A. It gives reaction of bromides.
B. Solution S (see Tests) gives the reactions of potassium.
TESTS
Solution S: Dissolve 10.0 g in carbon dioxide-free water R prepared from distilled water R and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear and colourless.
Acidity or alkalinity: To 10 ml of solution S add 0.1 ml of bromothymol blue solution R1. Not more than 0.5 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the colour of the indicator.
Bromates: To 10 ml of solution S add 1 ml of starch solution R, 0.1 ml of a 100 g/l solution of potassium iodide and 0.25 ml of 0.5 M sulphuric acid and allow to stand protected from light for 5 min. No blue or violet colour develops.
Chlorides: Maximum 0.6 per cent.
Iodides: To 5 ml of solution S add 0.15 ml of ferric chloride solution and 2 ml of methylene chloride.
Shake and allow to separate. The lower layer is colourless.
Sulphates: Maximum 100 ppm.
Iron: Maximum 20 ppm.
Magnesium and alkaline-earth metals: Maximum 200 ppm, calculated as Ca.
Heavy metals: Maximum 10 ppm.
Loss on drying: Maximum 1.0 per cent, determined on 1.000 g by drying in an oven at 105C for 3h.
Potassium Bromide USP Grade Specifications
KBr 119.0
Potassium Bromide contains not less than 98.0 percent and not more than 100.5 percent of KBr, calculated on the dried basis. It contains no added substances.
Appearance of solution: clear and colorless.
Test solution: Dissolve 10.0 g in carbon dioxide-free water, and dilute with the same solvent to 100 mL.
Identification:
A: A solution containing 4.5 mg of potassium bromide responds to the test for Bromide.
B: Responds to the test for Potassium.
Acidity or alkalinity: To 10 mL of the solution prepared for the test for Appearance of solution, add 0.1 mL of bromothymol blue TS: not more than 0.5 mL of 0.01 N hydrochloric acid or 0.01 N sodium hydroxide is required to change the color of this solution.
Loss on drying: Dry it at 100 to 105 for 3 hours: it loses not more than 1.0% of its weight.
Bromates:
Starch-mercuric iodide solution: Triturate 1.0 g of soluble starch with 5 mL of water and pour the mixture into 100 mL of boiling water, containing 10 mg of mercuric iodide.
Procedure: To 10 mL of the solution prepared for the test for Appearance of solution add 1 mL of Starch-mercuric iodide solution, 0.1 mL of a 100 g per L solution of potassium iodide, and 0.25 mL of 0.5 M sulfuric acid. Allow to stand protected from light for 5 minutes: no blue or violet color develops.
Limit of chlorine: not more than 0.6%.
Iodides: To 5 mL of the solution prepared for the test for Appearance of solution add 0.15 mL of a 10.5 g per 100 mL ferric chloride solution, and 2 mL of dichloromethane. Shake, and allow to separate. The lower layer is colorless.
Sulfates: A 2.0-g portion shows no more sulfate than corresponds to 0.2 mL of 0.020 N sulfuric acid (0.01%).
Limit of iron: not more than 20 ppm.
Magnesium and alkaline-earth metals: (0.02%, calculated as Ca).
Heavy metals: not more than 10 ppm.
Potassium Bromide Analytical Reagent Grade Specifications
Potassium Bromide
KBr
Formula Weight 119.00
CAS Number 7758-02-3
REQUIREMENTS
Assay: 99.0% KBr
pH of a 5% solution: 5.0-8.8 at 25C
MAXIMUM ALLOWABLE
Insoluble matter: 0.005%
Bromate (BrO3): 0.001%
Iodate (IO3): 0.001%
Chloride (Cl): 0.2%
Iodide (I): 0.001%
Nitrogen compounds (as N): 0.005%
Sulfate (SO4): 0.005%
Barium (Ba): 0.002%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Calcium (Ca): 0.002%
Magnesium (Mg): 0.001%
Sodium (Na): 0.02%.
Contact for Monograph, Uses, Matnfacturing Process, etc of Potassium Bromide and JP IP BP Ph Eur USP NF FCC Food AR ACS Reagent Grade Manufacturer Supplier Exporter
MANUFACTURER EXPORTER
MUMBAI 400009, INDIA. TEL: (OFFICE) 91-9322665100
info@manufacturerexporter.com
Copyright and Usual Disclaimer is Applicable
Last updated
11/19/2022
Manufacturer Suppliers Exporters at Wholesale Prices from India USA and around the Globe
Potassium Acetate -- Potassium Ascorbate -- Potassium Benzoate -- Potassium Bicarbonate -- Cream of Tartar or Potassium Bitartrate -- Potassium Bromide Manufacturer -- Potassium Carbonate -- Potassium Sodium Tartrate -- Potassium Chloride -- Potassium Chloride IP BP USP ACS AR Analytical Reagent FCC Food Grade -- Potassium Citrate -- Potassium Gluconate -- Potassium Hydroxide Pellets -- Potassium Iodate & Potassium Iodide -- Potassium Maleate -- Potassium Metabisulfite or Potassium Metabisulphite -- Potassium Malate -- Potassium Oleate -- Potassium Nitrate & Potassium Nitrite -- Potassium Pidolate -- Potassium Propionate -- Potassium Saccharate or Potassium D-Saccharate --
Ammonium Bromide -- Benzododecinium Bromide -- Sodium Bromide -- Sodium Bromate --