|
MANUFACTURER EXPORTER Maheboob Mansion, Chinchbunder, Mumbai 400009, India Tele.: 91-9322665100 |
Potassium Metabisulfite or Potassium Metabisulphite Manufacturer Exporter BP Ph Eur USP FCC Food Grade Manufacturer Exporter
Crystal Clear Products is a manufacturer exporter company manufacturing several chemicals including Potassium Metabisulfite or Potassium Metabisulphite and IP BP Ph Eur USP NF JP ACS AR Analytical Reagent FCC Food Grade, Pharmaceutical Chemicals at best prices. The group has offices and factories in India USA and UAE and toll manufacturers in China and sells to almost every country in the world.
The manufacturing facilities of our partner manufacturers have one or more of FDA-cGMP-GLP certification, ISO-9001 certification, Halal and/or Kosher certification, REACH pre-registration ISO-22000 HACCP. We also allow third party inspection of products offered. We can offer small quantities from laboratory and trial packs to large shipments of container loads of material.
Hazard Statements:
Hazard Statements:
H315: Causes skin irritation.
H318: Causes serious eye damage.
Signal Word: Danger
Transport Information
DOT USA, TDG Canada & ADR/RID Europe: Not dangerous goods.
IMO/IMDG: Not dangerous goods.
IATA/ICAO: Not dangerous goods.
You may please visit:
Potassium Metabisulfite or Potassium Metabisulphite SDS of Manufacturers
CAS Number 16731-55-8 Potassium Metabisulfite or Potassium Metabisulphite, EINECS: 240-795-3, Molecular Weight: 222.3, Chemical Formula: K2S2O5
Potassium Metabisulfite USP Grade Specifications
K2S2O5 222.33
Disulfurous acid, dipotassium salt.
Dipotassium pyrosulfite CAS 16731-55-8
Potassium Metabisulfite contains an amount of K2S2O5 equivalent to not less than 51.8 percent and not more than 57.6 percent of SO2.
Identification: A solution (1 in 20) responds to the tests for Potassium and for Sulfite.
Iron: Dissolve 1.00 g in 14 mL of dilute hydrochloric acid (2 in 7), and evaporate on a steam bath to dryness. Dissolve the residue in 7 mL of dilute hydrochloric acid (2 in 7), and again evaporate to dryness. Dissolve the resulting residue in a mixture of 2 mL of hydrochloric acid and 20 mL of water, add 3 drops of bromine TS, and boil to expel the bromine. Cool, and dilute with water to 47 mL: the limit is 0.001%.
Heavy metals: Dissolve 2 g in 20 mL of water, add 5 mL of hydrochloric acid, evaporate on a steam bath to about 1 mL, and dissolve the residue in 25 mL of water: the limit is 0.001%.
Potassium Metabisulphite BP Ph Eur Grade Specifications
K2S2O5 - 222.3 - CAS 16731-55-8
DEFINITION
Potassium metabisulphite (potassium disulphite).
Content: 95.0 per cent to 101.0 per cent.
CHARACTERS
Appearance: White or almost white powder, or colourless crystals.
Solubility: Freely soluble in water, slightly soluble in ethanol (96 per cent).
IDENTIFICATION
A. pH (see Tests).
B. To 5 ml of solution S (see Tests), add 0.5 ml of 0.05 M iodine. The mixture is colourless and gives reaction of sulphates.
C. Solution S gives reaction of potassium.
TESTS
Solution S: Dissolve 5.0 g in carbon dioxide-free water R and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear and colourless.
pH: 3.0 to 4.5 for solution S.
Thiosulphates: To 2.00 g add 25 ml of a 42.5 g/l solution of sodium hydroxide and 75 ml of water. Shake until dissolved and add 10 ml of formaldehyde and 10 ml of acetic acid. After 5 min, titrate with 0.05 M iodine using 1 ml of starch solution. Carry out a blank titration. The difference between the volumes consumed in the 2 titrations is maximum 0.15 ml.
Iron: Maximum 10 ppm.
Selenium: Maximum 10 ppm.
Zinc: Maximum 25 ppm.
Heavy metals: Maximum 10 ppm.
Potassium Metabisulfite FCC Food Grade Specifications
Potassium Pyrosulfite
K2S2O5 Formula weight 222.31
INS: 224 CAS 16731-55-8
DESCRIPTION
Potassium Metabisulfite occurs as white or colorless, free flowing crystals, crystalline powder, or granules. It gradually oxidizes in air to the sulfate. It is soluble in water, but it is insoluble in alcohol. Its solutions are acid to litmus.
REQUIREMENTS
Identification: A 1:10 aqueous solution gives positive tests for Potassium and for Sulfite.
Assay: Not less than 90.0% of K2S2O5.
Lead: Not more than 2 mg/kg.
Iron: Not more than 10 mg/kg.
Selenium: Not more than 5 mg/kg.
Contact for Monograph, Uses, Matnfacturing Process, etc of Potassium Metabisulfite or Potassium Metabisulphite and JP IP BP Ph Eur USP NF FCC Food AR ACS Reagent Grade Manufacturer Supplier Exporter
MANUFACTURER EXPORTER
MUMBAI 400009, INDIA. TEL: (OFFICE) 91-9322665100
info@manufacturerexporter.com
Copyright and Usual Disclaimer is Applicable
Last updated
11/19/2022
Manufacturer Suppliers Exporters at Wholesale Prices from India USA and around the Globe
Potassium Acetate -- Potassium Benzoate -- Potassium Bicarbonate -- Cream of Tartar or Potassium Bitartrate -- Potassium Bromide -- Potassium Carbonate -- Potassium Sodium Tartrate -- Potassium Chloride -- Potassium Chloride IP BP USP ACS AR Analytical Reagent FCC Food Grade -- Potassium Citrate -- Potassium Gluconate -- Potassium Hydroxide Pellets -- Potassium Iodate & Potassium Iodide -- Potassium Maleate -- Potassium Metabisulfite or Potassium Metabisulphite Manufacturer -- Potassium Malate -- Potassium Oleate -- Potassium Nitrate & Potassium Nitrite -- Potassium Pidolate -- Potassium Propionate -- Potassium Saccharate or Potassium D-Saccharate -- Sodium Hydroxymethanesulfonate Formaldehyde Bisulfite --